SPEC CPU®2017 Integer Rate Result

Copyright 2017-2019 Standard Performance Evaluation Corporation

Fujitsu

PRIMERGY TX1320 M4, Intel Xeon E-2288G,
3.70 GHz

SPECrate®2017_int_base = 59.60

SPECrate®2017_int_energy_base = 43500

SPECrate®2017_int_peak = Not Run

SPECrate®2017_int_energy_peak = Not Run

CPU2017 License: 19 Test Date: Oct-2019
Test Sponsor: Fujitsu Hardware Availability: Oct-2019
Tested by: Fujitsu Software Availability: May-2019

Benchmark result graphs are available in the PDF report.

Hardware
CPU Name: Intel Xeon E-2288G
  Max MHz: 5000
  Nominal: 3700
Enabled: 8 cores, 1 chip, 2 threads/core
Orderable: 1 chip
Cache L1: 32 KB I + 32 KB D on chip per core
  L2: 256 KB I+D on chip per core
  L3: 16 MB I+D on chip per chip
  Other: None
Memory: 64 GB (4 x 16 GB 2Rx8 PC4-2666V-E)
Storage: 1 x SATA M.2 SSD, 480 GB
Other: None
Software
OS: SUSE Linux Enterprise Server 15
4.12.14-25.28-default
Compiler: C/C++: Version 19.0.4.227 of Intel C/C++
Compiler for Linux;
Fortran: Version 19.0.4.227 of Intel Fortran
Compiler for Linux
Parallel: No
Firmware: Fujitsu BIOS Version V5.0.0.13 R1.12.0 for D3673-A1x. Released Sep-2019
File System: xfs
System State: Run level 3 (multi-user)
Base Pointers: 64-bit
Peak Pointers: Not Applicable
Other: None
Power Management: Enabled
Power
Max. Power (W): 194.27
Idle Power (W): 24.11
Min. Temperature (C): 20.50
Elevation (m): 11
Line Standard: 200 V / 50 Hz / 1 phase / 2 wires
Provisioning: Line-powered
Power Settings
Management FW: Version 1.60h for D3673-A1x of Fujitsu BMC Firmware
Memory Mode: Normal
Power-Relevant Hardware
Power Supply: 1 x 450 W (non-redundant)
  Details: Standard power supply part of base unit
S26361-K1639-V101
Backplane: 4 x 2.5inch HDD back plane
Other Storage: Embedded SATA Controller
Storage Model #s: S26361-F5706
NICs Installed: 2 x Intel I210 Springville @ 1 Gb
NICs Enabled (FW/OS): 2 / 2
NICs Connected/Speed: 1 @ 1 Gb
Other HW Model #s: None
Power Analyzer
Power Analyzer: 10.26.120.153:8888
Hardware Vendor: Hioki
Model: Hioki PW3336:1-Channel
Serial Number: 170134584
Input Connection: USB via USB-Serial CH340
Metrology Institute: NICT
Calibration By: HIOKI E.E. CORPORATION
Calibration Label: H06400087-1901T
Calibration Date: 1-Jan-2019
PTDaemon™ Version: 1.9.1 (a2d19f26; 2019-07-17)
Setup Description: Connected to PSU 1
Current Ranges Used: 1A
Voltage Range Used: 300V
Temperature Meter
Temperature Meter: 10.26.120.153:8889
Hardware Vendor: Digi International Inc.
Model: DigiWATCHPORT_H
Serial Number: W 640 45112
Input Connection: USB
PTDaemon Version: 1.9.1 (a2d19f26; 2019-07-17)
Setup Description: 5 mm in front of SUT main air intake

Base Results Table

Benchmark Copies Seconds Ratio Energy
(kJ)
Energy
Ratio
Average
Power
Maximum
Power
Seconds Ratio Energy
(kJ)
Energy
Ratio
Average
Power
Maximum
Power
Seconds Ratio Energy
(kJ)
Energy
Ratio
Average
Power
Maximum
Power
SPECrate®2017_int_base 59.60
SPECrate®2017_int_energy_base 43500
Results appear in the order in which they were run. Bold underlined text indicates a median measurement.
500.perlbench_r 16 501 50.8 75.7 365 151 176 503 50.7 76.0 364 151 162 502 50.7 75.8 364 151 161
502.gcc_r 16 504 44.9 74.5 330 148 191 503 45.1 74.4 331 148 189 503 45.0 74.2 332 147 191
505.mcf_r 16 386 67.0 58.8 481 152 193 385 67.1 58.8 481 152 194 386 67.0 58.9 480 153 193
520.omnetpp_r 16 692 30.3 1050 216 152 159 691 30.4 1050 216 152 159 693 30.3 1050 216 152 158
523.xalancbmk_r 16 298 56.8 41.4 442 139 188 295 57.3 41.2 444 140 182 293 57.7 40.9 448 140 189
525.x264_r 16 198 1410 30.2 1000 153 182 198 1410 30.3 1000 153 164 199 1410 30.2 1000 152 183
531.deepsjeng_r 16 333 55.1 50.3 396 151 171 333 55.1 50.2 397 151 170 333 55.1 50.3 396 151 171
541.leela_r 16 530 50.0 77.9 368 147 161 530 50.0 77.8 368 147 161 530 50.0 78.0 368 147 161
548.exchange2_r 16 301 1390 44.0 1030 146 169 300 1400 44.1 1030 147 168 300 1400 43.7 1040 146 169
557.xz_r 16 445 38.9 64.4 292 145 164 445 38.8 64.2 293 144 161 445 38.8 64.6 291 145 168

Submit Notes

 The taskset mechanism was used to bind copies to processors. The config file option 'submit'
 was used to generate taskset commands to bind each copy to a specific processor.
 For details, please see the config file.

Operating System Notes

 Stack size set to unlimited using "ulimit -s unlimited"
 Kernel Boot Parameter set with : nohz_full=1-15

Environment Variables Notes

Environment variables set by runcpu before the start of the run:
LD_LIBRARY_PATH =
     "/home/Benchmark/speccpu2017-1.1.0/lib/intel64:/home/Benchmark/speccpu20
     17-1.1.0/lib/ia32:/home/Benchmark/speccpu2017-1.1.0/je5.0.1-32"

General Notes

Environment variables set by runcpu before the start of the run:
LD_LIBRARY_PATH = "/home/Benchmark/speccpu2017/lib/intel64"
 Binaries compiled on a system with 1x Intel Core i9-799X CPU + 32GB RAM
 memory using Redhat Enterprise Linux 7.5
 Transparent Huge Pages enabled by default
 Prior to runcpu invocation
 Filesystem page cache synced and cleared with:
 sync; echo 3>       /proc/sys/vm/drop_caches

NA: The test sponsor attests, as of date of publication, that CVE-2017-5754 (Meltdown)
is mitigated in the system as tested and documented.
Yes: The test sponsor attests, as of date of publication, that CVE-2017-5753 (Spectre variant 1)
is mitigated in the system as tested and documented.
Yes: The test sponsor attests, as of date of publication, that CVE-2017-5715 (Spectre variant 2)
is mitigated in the system as tested and documented.

Platform Notes

 BIOS configuration:
 Adjacent Cache Line Prefetch = Disabled
 C states = Disabled
 Fan Control = Auto
 Hardware Prefetcher = Disabled
 Intel Virtualization Technology = Disabled
 Intel Speed Shift Technology = Disabled

 Sysinfo program /home/Benchmark/speccpu2017-1.1.0/bin/sysinfo
 Rev: r6365 of 2019-08-21 295195f888a3d7edb1e6e46a485a0011
 running on TX1320M4 Mon Oct 14 09:44:58 2019

 SUT (System Under Test) info as seen by some common utilities.
 For more information on this section, see
    https://www.spec.org/cpu2017/Docs/config.html#sysinfo

 From /proc/cpuinfo
    model name : Intel(R) Xeon(R) E-2288G CPU @ 3.70GHz
       1  "physical id"s (chips)
       16 "processors"
    cores, siblings (Caution: counting these is hw and system dependent. The following
    excerpts from /proc/cpuinfo might not be reliable.  Use with caution.)
       cpu cores : 8
       siblings  : 16
       physical 0: cores 0 1 2 3 4 5 6 7

 From lscpu:
      Architecture:        x86_64
      CPU op-mode(s):      32-bit, 64-bit
      Byte Order:          Little Endian
      CPU(s):              16
      On-line CPU(s) list: 0-15
      Thread(s) per core:  2
      Core(s) per socket:  8
      Socket(s):           1
      NUMA node(s):        1
      Vendor ID:           GenuineIntel
      CPU family:          6
      Model:               158
      Model name:          Intel(R) Xeon(R) E-2288G CPU @ 3.70GHz
      Stepping:            13
      CPU MHz:             3700.000
      CPU max MHz:         5000.0000
      CPU min MHz:         800.0000
      BogoMIPS:            7392.00
      Virtualization:      VT-x
      L1d cache:           32K
      L1i cache:           32K
      L2 cache:            256K
      L3 cache:            16384K
      NUMA node0 CPU(s):   0-15
      Flags:               fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
      pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp
      lm constant_tsc art arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc cpuid
      aperfmperf tsc_known_freq pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3
      sdbg fma cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer
      aes xsave avx f16c rdrand lahf_lm abm 3dnowprefetch cpuid_fault epb invpcid_single
      ssbd ibrs ibpb stibp ibrs_enhanced tpr_shadow vnmi flexpriority ept vpid fsgsbase
      tsc_adjust bmi1 hle avx2 smep bmi2 erms invpcid rtm mpx rdseed adx smap clflushopt
      intel_pt xsaveopt xsavec xgetbv1 xsaves dtherm ida arat pln pts hwp hwp_notify
      hwp_act_window hwp_epp flush_l1d arch_capabilities

 /proc/cpuinfo cache data
    cache size : 16384 KB

 From numactl --hardware  WARNING: a numactl 'node' might or might not correspond to a
 physical chip.
   available: 1 nodes (0)
   node 0 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
   node 0 size: 63885 MB
   node 0 free: 63384 MB
   node distances:
   node   0
     0:  10

 From /proc/meminfo
    MemTotal:       65418524 kB
    HugePages_Total:       0
    Hugepagesize:       2048 kB

 From /etc/*release* /etc/*version*
    os-release:
       NAME="SLES"
       VERSION="15"
       VERSION_ID="15"
       PRETTY_NAME="SUSE Linux Enterprise Server 15"
       ID="sles"
       ID_LIKE="suse"
       ANSI_COLOR="0;32"
       CPE_NAME="cpe:/o:suse:sles:15"

 uname -a:
    Linux TX1320M4 4.12.14-25.28-default #1 SMP Wed Jan 16 20:00:47 UTC 2019 (dd6077c)
    x86_64 x86_64 x86_64 GNU/Linux

 Kernel self-reported vulnerability status:

 CVE-2018-3620 (L1 Terminal Fault):        Not affected
 Microarchitectural Data Sampling:         No status reported
 CVE-2017-5754 (Meltdown):                 Not affected
 CVE-2018-3639 (Speculative Store Bypass): Mitigation: Speculative Store Bypass disabled
                                           via prctl and seccomp
 CVE-2017-5753 (Spectre variant 1):        Mitigation: __user pointer sanitization
 CVE-2017-5715 (Spectre variant 2):        Mitigation: Enhanced IBRS, IBPB: conditional,
                                           RSB filling

 run-level 3 Oct 14 02:15

 SPEC is set to: /home/Benchmark/speccpu2017-1.1.0
    Filesystem     Type  Size  Used Avail Use% Mounted on
    /dev/sdb4      xfs   191G   79G  113G  42% /home

 From /sys/devices/virtual/dmi/id
     BIOS:    FUJITSU // American Megatrends Inc. V5.0.0.13 R1.12.0 for D3673-A1x
               09/06/2019
     Vendor:  FUJITSU
     Product: PRIMERGY TX1320 M4
     Product Family: SERVER
     Serial:  YMJKXXXXXX

 Additional information from dmidecode follows.  WARNING: Use caution when you interpret
 this section. The 'dmidecode' program reads system data which is "intended to allow
 hardware to be accurately determined", but the intent may not be met, as there are
 frequent changes to hardware, firmware, and the "DMTF SMBIOS" standard.
   Memory:
     4x SK Hynix HMA82GU7CJR8N-VK 16 GB 2 rank 2667

 (End of data from sysinfo program)

Power Settings Notes

PTDaemon to measure power and temperature was run on a PRIMERGY RX2530 M5 as a controller
with 2x Intel Xeon Platinum 8280 CPU and 768 GB of memory using Windows Server 2012 R2.
Power management in the BIOS was default except for any settings mentioned in BIOS Configuration.
No power management settings were set in the management firmware.
The optional optical drive was not installed.
The run was started and observed through the management firmware.

Compiler Version Notes

==============================================================================
C       | 500.perlbench_r(base) 502.gcc_r(base) 505.mcf_r(base)
        | 525.x264_r(base) 557.xz_r(base)
------------------------------------------------------------------------------
Intel(R) C Intel(R) 64 Compiler for applications running on Intel(R) 64,
  Version 19.0.4.227 Build 20190416
Copyright (C) 1985-2019 Intel Corporation.  All rights reserved.
------------------------------------------------------------------------------

==============================================================================
C++     | 520.omnetpp_r(base) 523.xalancbmk_r(base) 531.deepsjeng_r(base)
        | 541.leela_r(base)
------------------------------------------------------------------------------
Intel(R) C++ Intel(R) 64 Compiler for applications running on Intel(R) 64,
  Version 19.0.4.227 Build 20190416
Copyright (C) 1985-2019 Intel Corporation.  All rights reserved.
------------------------------------------------------------------------------

==============================================================================
Fortran | 548.exchange2_r(base)
------------------------------------------------------------------------------
Intel(R) Fortran Intel(R) 64 Compiler for applications running on Intel(R)
  64, Version 19.0.4.227 Build 20190416
Copyright (C) 1985-2019 Intel Corporation.  All rights reserved.
------------------------------------------------------------------------------

Base Compiler Invocation

C benchmarks:

 icc -m64 -std=c11 

C++ benchmarks:

 icpc -m64 

Fortran benchmarks:

 ifort -m64 

Base Portability Flags

500.perlbench_r:  -DSPEC_LP64   -DSPEC_LINUX_X64 
502.gcc_r:  -DSPEC_LP64 
505.mcf_r:  -DSPEC_LP64 
520.omnetpp_r:  -DSPEC_LP64 
523.xalancbmk_r:  -DSPEC_LP64   -DSPEC_LINUX 
525.x264_r:  -DSPEC_LP64 
531.deepsjeng_r:  -DSPEC_LP64 
541.leela_r:  -DSPEC_LP64 
548.exchange2_r:  -DSPEC_LP64 
557.xz_r:  -DSPEC_LP64 

Base Optimization Flags

C benchmarks:

 -Wl,-z,muldefs   -xCORE-AVX2   -ipo   -O3   -no-prec-div   -qopt-mem-layout-trans=4   -L/usr/local/IntelCompiler19/compilers_and_libraries_2019.4.227/linux/compiler/lib/intel64   -lqkmalloc 

C++ benchmarks:

 -Wl,-z,muldefs   -xCORE-AVX2   -ipo   -O3   -no-prec-div   -qopt-mem-layout-trans=4   -L/usr/local/IntelCompiler19/compilers_and_libraries_2019.4.227/linux/compiler/lib/intel64   -lqkmalloc 

Fortran benchmarks:

 -Wl,-z,muldefs   -xCORE-AVX2   -ipo   -O3   -no-prec-div   -qopt-mem-layout-trans=4   -nostandard-realloc-lhs   -align array32byte   -L/usr/local/IntelCompiler19/compilers_and_libraries_2019.4.227/linux/compiler/lib/intel64   -lqkmalloc 

The flags files that were used to format this result can be browsed at
http://www.spec.org/cpu2017/flags/Intel-ic19.0u1-official-linux64.2019-07-09.html,
http://www.spec.org/cpu2017/flags/Fujitsu-Platform-Settings-V1.0.2-CFL-RevB.2019-11-01.html.

You can also download the XML flags sources by saving the following links:
http://www.spec.org/cpu2017/flags/Intel-ic19.0u1-official-linux64.2019-07-09.xml,
http://www.spec.org/cpu2017/flags/Fujitsu-Platform-Settings-V1.0.2-CFL-RevB.2019-11-01.xml.