# Invocation command line: # /N/dc2/projects/hpc/lijunj/spec/accel-1.2-run/br2p/bin/runspec --platform Intel --device 0 --config acc-cpu.cfg --reportable openacc --output_format raw,pdf,txt # output_root was not used for this run ############################################################################ # Invocation command line: # /var/spool/alps/1696540/runspec --rebuild --reportable --config tesla-pgi142.cfg openacc # output_root was not used for this run ############################################################################ #################################################################### # Tester information #################################################################### license_num = 3440A prepared_by = Junjie Li tester = Indiana University test_sponsor = Indiana University #################################################################### # Power and temperature meter configuration #################################################################### power = no power_analyzer = 192.168.1.112:8888 temp_meter = 192.168.1.112:8889 mean_anyway = 1 voltage_range = auto idle_current_range = auto current_range = auto ###################################################################### # The header section of the config file. Must appear # before any instances of "default=" # # ext = how the binaries you generated will be identified # tune = specify "base" or "peak" or "all" ext = pgi output_format = asc teeout = yes teerunout = yes #tune = base,peak tune = base #strict_rundir_verify = 0 #output_root = /local/home//SPECACCEL #################################################################### # HOST Hardware information #################################################################### default=default=default=default: hw_vendor = Cray hw_avail = Apr-2013 hw_cpu_mhz = 2300 hw_cpu_max_mhz = 3200 hw_cpu_char000 = AMD Turbo CORE Technology up to 3.2GHz, Turbo hw_cpu_char001 = CORE off hw_disk = Two 500 GB 7200 RPM 2.5" SAS hard drives, in RAID 1 mirror hw_fpu = Integrated hw_memory000 = 32 GB (4 x 8 GB 2Rx4 PC3L-12800R-11, ECC) hw_model = Cray XK7 hw_ncores = 16 hw_nchips = 2 hw_ncoresperchip = 16 hw_nthreadspercore = 1 hw_ncpuorder = 1 chip hw_other = None hw_ocache = None hw_pcache = 32 KB I + 16 KB D on chip per core hw_scache = 16 MB I+D on chip per chip, 2 MB shared / 2 cores hw_tcache = 16 MB I+D on chip per chip, 8 MB shared / 8 cores #################################################################### # Accelerator Hardware information #################################################################### hw_accel_connect = PCIe 2.0 16x hw_accel_desc000 = NVIDIA Tesla K20m GPU, 2496 CUDA cores, 706MHz, 5 hw_accel_desc001 = GB GDDR5 RAM hw_accel_ecc = yes hw_accel_model = Tesla K20 hw_accel_name = NVIDIA Tesla K20 hw_accel_type = GPU hw_accel_vendor = NVIDIA sw_accel_driver = 304.47.09-1_1.0401.835.0.0.gem #################################################################### # Software information #################################################################### default=default=default=default: sw_file = NFSv3 (IBM N5500 NAS) over Gb ethernet sw_os000 = SUSE Linux Enterprise Server 11 (x86_64), Cray sw_os001 = Linux Environment 4.1 sw_os001 = Kernel 2.6.32.59-0.7.1_1.0401.6845-cray_gem_c sw_other = NVIDIA CUDA 8.0.44 sw_state = Multi-user, run level 3 sw_base_ptrsize = 64-bit sw_avail = Aug-2016 sw_compiler = PGI Accelerator Server Complete, Release 16.9 sw_accel_driver = NVIDIA UNIX x86_64 Kernel Module 319.60 CC = pgcc CXX = pgc++ FC = pgfortran #openacc=default=default=default: #sw_other = FFTW 3.3.4 openacc=default=default=default: OPTIMIZE = -fast -Mfprelaxed -acc -ta=multicore #FOPTIMIZE = -acc -ta=multicore #COPTIMIZE = -acc -ta=multicore 118.cutcp=default=default=default: CPORTABILITY += -D__GNUC__ 359.miniGhost=default=default=default: EXTRA_LDFLAGS += -Mnomain # The following settings were obtained by running 'specperl $[top]/Docs/sysinfo' default: notes_plat_sysinfo_000 = Sysinfo program /N/soft/mason/specaccelv1-039/Docs/sysinfo notes_plat_sysinfo_005 = $Rev: 6874 $ $Date:: 2013-11-20 #$ 0953404ef7e75a5f9bbb534c6de3f831 notes_plat_sysinfo_010 = running on nid00359 Sun Mar 2 11:01:12 2014 notes_plat_sysinfo_015 = notes_plat_sysinfo_020 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_025 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_030 = http://www.spec.org/accel/Docs/config.html#sysinfo notes_plat_sysinfo_035 = notes_plat_sysinfo_040 = From /proc/cpuinfo notes_plat_sysinfo_045 = model name : AMD Opteron(TM) Processor 6276 notes_plat_sysinfo_050 = 1 "physical id"s (chips) notes_plat_sysinfo_055 = 16 "processors" notes_plat_sysinfo_060 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_065 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_070 = caution.) notes_plat_sysinfo_075 = cpu cores : 16 notes_plat_sysinfo_080 = siblings : 16 notes_plat_sysinfo_085 = physical 0: cores 0 1 2 3 4 5 6 7 notes_plat_sysinfo_090 = cache size : 2048 KB notes_plat_sysinfo_095 = notes_plat_sysinfo_100 = From /proc/meminfo notes_plat_sysinfo_105 = MemTotal: 33084660 kB notes_plat_sysinfo_110 = HugePages_Total: 0 notes_plat_sysinfo_115 = Hugepagesize: 2048 kB notes_plat_sysinfo_120 = notes_plat_sysinfo_125 = /usr/bin/lsb_release -d notes_plat_sysinfo_130 = SUSE Linux Enterprise Server 11 (x86_64) notes_plat_sysinfo_135 = notes_plat_sysinfo_140 = From /etc/*release* /etc/*version* notes_plat_sysinfo_145 = SuSE-release: notes_plat_sysinfo_150 = SUSE Linux Enterprise Server 11 (x86_64) notes_plat_sysinfo_155 = VERSION = 11 notes_plat_sysinfo_160 = PATCHLEVEL = 1 notes_plat_sysinfo_165 = mazama-release: notes_plat_sysinfo_170 = Mazama Wed Aug 28 02:06:30 CDT 2013 on hssbld0 by bwdev notes_plat_sysinfo_175 = lsb-cray-mazama-7.1.0 notes_plat_sysinfo_180 = notes_plat_sysinfo_185 = uname -a: notes_plat_sysinfo_190 = Linux nid00359 2.6.32.59-0.7.1_1.0401.6845-cray_gem_c #1 SMP Thu Nov 15 notes_plat_sysinfo_195 = 00:24:59 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_200 = notes_plat_sysinfo_205 = notes_plat_sysinfo_210 = SPEC is set to: /N/soft/mason/specaccelv1-039 notes_plat_sysinfo_215 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_220 = /N/soft dvs 1.7T 1.6T 103G 94% /N/soft notes_plat_sysinfo_225 = notes_plat_sysinfo_230 = Cannot run dmidecode; consider saying 'chmod +s /usr/sbin/dmidecode' notes_plat_sysinfo_235 = notes_plat_sysinfo_240 = (End of data from sysinfo program) hw_cpu_name = AMD Opteron 6276 hw_disk = NONE hw_nchips = 1 prepared_by = huili (is never output, only tags rawfile) sw_file = NFSv3 (IBM N5500 NAS) over Gb ethernet sw_os002 = SUSE Linux Enterprise Server 11 (x86_64) sw_os003 = 2.6.32.59-0.7.1_1.0401.6845-cray_gem_c sw_state = Multi-user, run level 3 # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: sw_peak_ptrsize = Not Applicable flagsurl000 = http://www.spec.org/accel/flags/pgi2014_flags.xml # The following settings were obtained by running 'specperl $[top]/Docs/sysinfo' default: notes_plat_sysinfo_000 = Sysinfo program /N/dc2/projects/hpc/lijunj/spec/accel-1.2-run/br2p/Docs/sysinfo notes_plat_sysinfo_005 = $Rev: 6965 $ $Date:: 2015-04-21 #$ c05a7f14b1b1765e3fe1df68447e8a35 notes_plat_sysinfo_010 = running on nid00571 Sat Aug 12 19:56:51 2017 notes_plat_sysinfo_015 = notes_plat_sysinfo_020 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_025 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_030 = http://www.spec.org/accel/Docs/config.html#sysinfo notes_plat_sysinfo_035 = notes_plat_sysinfo_040 = From /proc/cpuinfo notes_plat_sysinfo_045 = model name : Intel(R) Xeon(R) CPU E5-2697 v2 @ 2.70GHz notes_plat_sysinfo_050 = 2 "physical id"s (chips) notes_plat_sysinfo_055 = 48 "processors" notes_plat_sysinfo_060 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_065 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_070 = caution.) notes_plat_sysinfo_075 = cpu cores : 12 notes_plat_sysinfo_080 = siblings : 24 notes_plat_sysinfo_085 = physical 0: cores 0 1 2 3 4 5 8 9 10 11 12 13 notes_plat_sysinfo_090 = physical 1: cores 0 1 2 3 4 5 8 9 10 11 12 13 notes_plat_sysinfo_095 = cache size : 30720 KB notes_plat_sysinfo_100 = notes_plat_sysinfo_105 = From /proc/meminfo notes_plat_sysinfo_110 = MemTotal: 66072376 kB notes_plat_sysinfo_115 = HugePages_Total: 0 notes_plat_sysinfo_120 = Hugepagesize: 2048 kB notes_plat_sysinfo_125 = notes_plat_sysinfo_130 = /usr/bin/lsb_release -d notes_plat_sysinfo_135 = SUSE Linux Enterprise Server 11 (x86_64) notes_plat_sysinfo_140 = notes_plat_sysinfo_145 = From /etc/*release* /etc/*version* notes_plat_sysinfo_150 = SuSE-release: notes_plat_sysinfo_155 = SUSE Linux Enterprise Server 11 (x86_64) notes_plat_sysinfo_160 = VERSION = 11 notes_plat_sysinfo_165 = PATCHLEVEL = 3 notes_plat_sysinfo_170 = notes_plat_sysinfo_175 = uname -a: notes_plat_sysinfo_180 = Linux nid00571 3.0.101-0.46.1_1.0502.8871-cray_ari_c #1 SMP Tue Jul 18 notes_plat_sysinfo_185 = 17:24:02 UTC 2017 x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_190 = notes_plat_sysinfo_195 = notes_plat_sysinfo_200 = SPEC is set to: /N/dc2/projects/hpc/lijunj/spec/accel-1.2-run/br2p notes_plat_sysinfo_205 = Filesystem Type Size Used Avail Use% Mounted notes_plat_sysinfo_210 = on notes_plat_sysinfo_215 = 10.10.0.171@o2ib:10.10.0.172@o2ib:/dc2 lustre 5.3P 5.0P 198T 97% /N/dc2 notes_plat_sysinfo_220 = notes_plat_sysinfo_225 = Cannot run dmidecode; consider saying 'chmod +s /usr/sbin/dmidecode' notes_plat_sysinfo_230 = notes_plat_sysinfo_235 = (End of data from sysinfo program) hw_cpu_name = Intel Xeon E5-2697 v2 hw_disk = 5.3P add more disk info here hw_memory001 = 63.012 GB fixme: If using DDR3, format is: hw_memory002 = 'N GB (M x N GB nRxn PCn-nnnnnR-n, ECC)' hw_nchips = 2 prepared_by = lijunj (is never output, only tags rawfile) sw_file = lustre sw_os001 = SUSE Linux Enterprise Server 11 (x86_64) sw_os002 = 3.0.101-0.46.1_1.0502.8871-cray_ari_c sw_state = Run level N (add definition here) # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: flagsurl000 = pgi2017_accel.xml hw_cpu_name = Intel Xeon E5-2697 v2 hw_cpu_mhz = 2700 hw_cpu_max_mhz = 2700 hw_fpu = Integrated hw_ncpuorder = 1-2 chips hw_pcache = 32 KB I + 32 KB D on chip per core hw_scache = 256 KB I+D on chip per core hw_tcache = 30 MB I+D on chip per chip hw_ocache = None hw_disk = None hw_other = None hw_accel_model = Intel Xeon E5-2697 v2 @ 2.7 GHz hw_accel_vendor = Intel hw_accel_name = Intel Xeon E5-2697 v2 @ 2.7 GHz hw_accel_type = CPU hw_accel_connect = N/A hw_accel_ecc = Yes sw_file = Lustre 2.5 (DDN SFA12K) over QDR InifiBand sw_state = Run level 3 (Multi-User) sw_base_ptrsize = 64-bit sw_peak_ptrsize = Not Applicable hw_accel_desc000 = Intel Turbo Boost Technology off, hw_accel_desc001 = Hyper-threading off. test_sponsor = Indiana University license_num = 3440A tester = Indiana University hw_avail = Apr-2013 sw_avail = Mar-2017 prepared_by = Junjie Li (is never output, only tags rawfile) hw_vendor = Cray hw_model = Cray XC30 hw_nthreadspercore = 2 hw_ncoresperchip = 12 hw_ncores = 24 hw_nchips = 2 hw_cpu_char000 = Intel Turbo Boost Technology off, Hyper-threading hw_cpu_char001 = off. hw_memory000 = 64 GB (8 x 8 GB 2Rx4 PC3-14900R-13, ECC) sw_compiler000 = Version 17.0.2.174 of Intel Parallel Studio XE sw_compiler001 = for Linux Build 20170213 sw_os000 = SUSE Linux Enterprise Server 11 (x86_64) sw_os001 = 3.0.101-0.46.1_1.0502.8871-cray_ari_c notes_plat_sysinfo_000 = Sysinfo program /N/dc2/projects/hpc/lijunj/spec/accel-1.2-run/br2p/Docs/sysinfo notes_plat_sysinfo_005 = $Rev: 6965 $ $Date:: 2015-04-21 #$ c05a7f14b1b1765e3fe1df68447e8a35 notes_plat_sysinfo_010 = running on nid00571 Sat Aug 12 19:56:51 2017 notes_plat_sysinfo_015 = notes_plat_sysinfo_020 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_025 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_030 = http://www.spec.org/accel/Docs/config.html#sysinfo notes_plat_sysinfo_035 = notes_plat_sysinfo_040 = From /proc/cpuinfo notes_plat_sysinfo_045 = model name : Intel(R) Xeon(R) CPU E5-2697 v2 @ 2.70GHz notes_plat_sysinfo_050 = 2 "physical id"s (chips) notes_plat_sysinfo_055 = 48 "processors" notes_plat_sysinfo_060 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_065 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_070 = caution.) notes_plat_sysinfo_075 = cpu cores : 12 notes_plat_sysinfo_080 = siblings : 24 notes_plat_sysinfo_085 = physical 0: cores 0 1 2 3 4 5 8 9 10 11 12 13 notes_plat_sysinfo_090 = physical 1: cores 0 1 2 3 4 5 8 9 10 11 12 13 notes_plat_sysinfo_095 = cache size : 30720 KB notes_plat_sysinfo_100 = notes_plat_sysinfo_105 = From /proc/meminfo notes_plat_sysinfo_110 = MemTotal: 66072376 kB notes_plat_sysinfo_115 = HugePages_Total: 0 notes_plat_sysinfo_120 = Hugepagesize: 2048 kB notes_plat_sysinfo_125 = notes_plat_sysinfo_130 = /usr/bin/lsb_release -d notes_plat_sysinfo_135 = SUSE Linux Enterprise Server 11 (x86_64) notes_plat_sysinfo_140 = notes_plat_sysinfo_145 = From /etc/*release* /etc/*version* notes_plat_sysinfo_150 = SuSE-release: notes_plat_sysinfo_155 = SUSE Linux Enterprise Server 11 (x86_64) notes_plat_sysinfo_160 = VERSION = 11 notes_plat_sysinfo_165 = PATCHLEVEL = 3 notes_plat_sysinfo_170 = notes_plat_sysinfo_175 = uname -a: notes_plat_sysinfo_180 = Linux nid00571 3.0.101-0.46.1_1.0502.8871-cray_ari_c #1 SMP Tue Jul 18 notes_plat_sysinfo_185 = 17:24:02 UTC 2017 x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_190 = notes_plat_sysinfo_195 = notes_plat_sysinfo_200 = SPEC is set to: /N/dc2/projects/hpc/lijunj/spec/accel-1.2-run/br2p notes_plat_sysinfo_205 = Filesystem Type Size Used Avail Use% Mounted notes_plat_sysinfo_210 = on notes_plat_sysinfo_215 = 10.10.0.171@o2ib:10.10.0.172@o2ib:/dc2 lustre 5.3P 5.0P 198T 97% /N/dc2 notes_plat_sysinfo_220 = notes_plat_sysinfo_225 = Cannot run dmidecode; consider saying 'chmod +s /usr/sbin/dmidecode' notes_plat_sysinfo_230 = notes_plat_sysinfo_235 = (End of data from sysinfo program) notes_plat_sysinfo_240 = (End of data from sysinfo program) # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: flagsurl000 = pgi2017_accel.xml hw_cpu_name = Intel Xeon E5-2697 v2 hw_cpu_mhz = 2700 hw_cpu_max_mhz = 2700 hw_fpu = Integrated hw_ncpuorder = 1-2 chips hw_pcache = 32 KB I + 32 KB D on chip per core hw_scache = 256 KB I+D on chip per core hw_tcache = 30 MB I+D on chip per chip hw_ocache = None hw_disk = None hw_other = None hw_accel_model = Intel Xeon E5-2697 v2 @ 2.7 GHz hw_accel_vendor = Intel hw_accel_name = Intel Xeon E5-2697 v2 @ 2.7 GHz hw_accel_type = CPU hw_accel_connect = N/A hw_accel_ecc = Yes sw_file = Lustre 2.5 (DDN SFA12K) over QDR InifiBand sw_state = Run level 3 (Multi-User) sw_base_ptrsize = 64-bit sw_peak_ptrsize = Not Applicable sw_other = None hw_accel_desc000 = Intel Turbo Boost Technology off, hw_accel_desc001 = Hyper-threading off. test_sponsor = Indiana University license_num = 3440A tester = Indiana University hw_avail = Apr-2013 sw_avail = Mar-2017 prepared_by = Junjie Li (is never output, only tags rawfile) hw_vendor = Cray hw_model = Cray XC30 hw_nthreadspercore = 2 hw_ncoresperchip = 12 hw_ncores = 24 hw_nchips = 2 hw_cpu_char000 = Intel Turbo Boost Technology off, Hyper-threading hw_cpu_char001 = off. hw_memory000 = 64 GB (8 x 8 GB 2Rx4 PC3-14900R-13, ECC) sw_compiler000 = Version 17.0.2.174 of Intel Parallel Studio XE sw_compiler001 = for Linux Build 20170213 sw_os000 = SUSE Linux Enterprise Server 11 (x86_64) sw_os001 = 3.0.101-0.46.1_1.0502.8871-cray_ari_c notes_plat_sysinfo_000 = Sysinfo program /N/dc2/projects/hpc/lijunj/spec/accel-1.2-run/br2p/Docs/sysinfo notes_plat_sysinfo_005 = $Rev: 6965 $ $Date:: 2015-04-21 #$ c05a7f14b1b1765e3fe1df68447e8a35 notes_plat_sysinfo_010 = running on nid00571 Sat Aug 12 19:56:51 2017 notes_plat_sysinfo_015 = notes_plat_sysinfo_020 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_025 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_030 = http://www.spec.org/accel/Docs/config.html#sysinfo notes_plat_sysinfo_035 = notes_plat_sysinfo_040 = From /proc/cpuinfo notes_plat_sysinfo_045 = model name : Intel(R) Xeon(R) CPU E5-2697 v2 @ 2.70GHz notes_plat_sysinfo_050 = 2 "physical id"s (chips) notes_plat_sysinfo_055 = 48 "processors" notes_plat_sysinfo_060 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_065 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_070 = caution.) notes_plat_sysinfo_075 = cpu cores : 12 notes_plat_sysinfo_080 = siblings : 24 notes_plat_sysinfo_085 = physical 0: cores 0 1 2 3 4 5 8 9 10 11 12 13 notes_plat_sysinfo_090 = physical 1: cores 0 1 2 3 4 5 8 9 10 11 12 13 notes_plat_sysinfo_095 = cache size : 30720 KB notes_plat_sysinfo_100 = notes_plat_sysinfo_105 = From /proc/meminfo notes_plat_sysinfo_110 = MemTotal: 66072376 kB notes_plat_sysinfo_115 = HugePages_Total: 0 notes_plat_sysinfo_120 = Hugepagesize: 2048 kB notes_plat_sysinfo_125 = notes_plat_sysinfo_130 = /usr/bin/lsb_release -d notes_plat_sysinfo_135 = SUSE Linux Enterprise Server 11 (x86_64) notes_plat_sysinfo_140 = notes_plat_sysinfo_145 = From /etc/*release* /etc/*version* notes_plat_sysinfo_150 = SuSE-release: notes_plat_sysinfo_155 = SUSE Linux Enterprise Server 11 (x86_64) notes_plat_sysinfo_160 = VERSION = 11 notes_plat_sysinfo_165 = PATCHLEVEL = 3 notes_plat_sysinfo_170 = notes_plat_sysinfo_175 = uname -a: notes_plat_sysinfo_180 = Linux nid00571 3.0.101-0.46.1_1.0502.8871-cray_ari_c #1 SMP Tue Jul 18 notes_plat_sysinfo_185 = 17:24:02 UTC 2017 x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_190 = notes_plat_sysinfo_195 = notes_plat_sysinfo_200 = SPEC is set to: /N/dc2/projects/hpc/lijunj/spec/accel-1.2-run/br2p notes_plat_sysinfo_205 = Filesystem Type Size Used Avail Use% Mounted notes_plat_sysinfo_210 = on notes_plat_sysinfo_215 = 10.10.0.171@o2ib:10.10.0.172@o2ib:/dc2 lustre 5.3P 5.0P 198T 97% /N/dc2 notes_plat_sysinfo_220 = notes_plat_sysinfo_225 = Cannot run dmidecode; consider saying 'chmod +s /usr/sbin/dmidecode' notes_plat_sysinfo_230 = notes_plat_sysinfo_235 = (End of data from sysinfo program) notes_plat_sysinfo_240 = (End of data from sysinfo program) # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: flagsurl000 = pgi2017_accel.xml hw_cpu_name = Intel Xeon E5-2697 v2 hw_cpu_mhz = 2700 hw_cpu_max_mhz = 2700 hw_fpu = Integrated hw_ncpuorder = 1-2 chips hw_pcache = 32 KB I + 32 KB D on chip per core hw_scache = 256 KB I+D on chip per core hw_tcache = 30 MB I+D on chip per chip hw_ocache = None hw_disk = None hw_other = None hw_accel_model = Intel Xeon E5-2697 v2 hw_accel_vendor = Intel hw_accel_name = Intel Xeon E5-2697 v2 hw_accel_type = CPU hw_accel_connect = N/A hw_accel_ecc = Yes sw_file = Lustre 2.5 (DDN SFA12K) over QDR InifiBand sw_state = Run level 3 (Multi-User) sw_base_ptrsize = 64-bit sw_peak_ptrsize = Not Applicable sw_other = None hw_accel_desc000 = Intel Xeon E5-2697 v2 @ 2.7 GHz test_sponsor = Indiana University license_num = 3440A tester = Indiana University hw_avail = Apr-2013 sw_avail = Mar-2017 prepared_by = Junjie Li (is never output, only tags rawfile) hw_vendor = Cray hw_model = Cray XC30 hw_nthreadspercore = 2 hw_ncoresperchip = 12 hw_ncores = 24 hw_nchips = 2 hw_cpu_char000 = Intel Turbo Boost Technology off, hw_cpu_char001 = Hyper-threading off. hw_memory000 = 64 GB (8 x 8 GB 2Rx4 PC3-14900R-13, ECC) sw_compiler000 = Version 17.0.2.174 of Intel Parallel Studio XE sw_compiler001 = for Linux Build 20170213 sw_os000 = SUSE Linux Enterprise Server 11 (x86_64) sw_os001 = 3.0.101-0.46.1_1.0502.8871-cray_ari_c notes_plat_sysinfo_000 = Sysinfo program /N/dc2/projects/hpc/lijunj/spec/accel-1.2-run/br2p/Docs/sysinfo notes_plat_sysinfo_005 = $Rev: 6965 $ $Date:: 2015-04-21 #$ c05a7f14b1b1765e3fe1df68447e8a35 notes_plat_sysinfo_010 = running on nid00571 Sat Aug 12 19:56:51 2017 notes_plat_sysinfo_015 = notes_plat_sysinfo_020 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_025 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_030 = http://www.spec.org/accel/Docs/config.html#sysinfo notes_plat_sysinfo_035 = notes_plat_sysinfo_040 = From /proc/cpuinfo notes_plat_sysinfo_045 = model name : Intel(R) Xeon(R) CPU E5-2697 v2 @ 2.70GHz notes_plat_sysinfo_050 = 2 "physical id"s (chips) notes_plat_sysinfo_055 = 48 "processors" notes_plat_sysinfo_060 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_065 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_070 = caution.) notes_plat_sysinfo_075 = cpu cores : 12 notes_plat_sysinfo_080 = siblings : 24 notes_plat_sysinfo_085 = physical 0: cores 0 1 2 3 4 5 8 9 10 11 12 13 notes_plat_sysinfo_090 = physical 1: cores 0 1 2 3 4 5 8 9 10 11 12 13 notes_plat_sysinfo_095 = cache size : 30720 KB notes_plat_sysinfo_100 = notes_plat_sysinfo_105 = From /proc/meminfo notes_plat_sysinfo_110 = MemTotal: 66072376 kB notes_plat_sysinfo_115 = HugePages_Total: 0 notes_plat_sysinfo_120 = Hugepagesize: 2048 kB notes_plat_sysinfo_125 = notes_plat_sysinfo_130 = /usr/bin/lsb_release -d notes_plat_sysinfo_135 = SUSE Linux Enterprise Server 11 (x86_64) notes_plat_sysinfo_140 = notes_plat_sysinfo_145 = From /etc/*release* /etc/*version* notes_plat_sysinfo_150 = SuSE-release: notes_plat_sysinfo_155 = SUSE Linux Enterprise Server 11 (x86_64) notes_plat_sysinfo_160 = VERSION = 11 notes_plat_sysinfo_165 = PATCHLEVEL = 3 notes_plat_sysinfo_170 = notes_plat_sysinfo_175 = uname -a: notes_plat_sysinfo_180 = Linux nid00571 3.0.101-0.46.1_1.0502.8871-cray_ari_c #1 SMP Tue Jul 18 notes_plat_sysinfo_185 = 17:24:02 UTC 2017 x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_190 = notes_plat_sysinfo_195 = notes_plat_sysinfo_200 = SPEC is set to: /N/dc2/projects/hpc/lijunj/spec/accel-1.2-run/br2p notes_plat_sysinfo_205 = Filesystem Type Size Used Avail Use% Mounted notes_plat_sysinfo_210 = on notes_plat_sysinfo_215 = 10.10.0.171@o2ib:10.10.0.172@o2ib:/dc2 lustre 5.3P 5.0P 198T 97% /N/dc2 notes_plat_sysinfo_220 = notes_plat_sysinfo_225 = Cannot run dmidecode; consider saying 'chmod +s /usr/sbin/dmidecode' notes_plat_sysinfo_230 = notes_plat_sysinfo_235 = (End of data from sysinfo program) notes_plat_sysinfo_240 = (End of data from sysinfo program) # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: flagsurl000 = pgi2017_accel.xml hw_cpu_name = Intel Xeon E5-2697 v2 hw_cpu_mhz = 2700 hw_cpu_max_mhz = 2700 hw_fpu = Integrated hw_ncpuorder = 1-2 chips hw_pcache = 32 KB I + 32 KB D on chip per core hw_scache = 256 KB I+D on chip per core hw_tcache = 30 MB I+D on chip per chip hw_ocache = None hw_disk = None hw_other = None hw_accel_model = Intel Xeon E5-2697 v2 hw_accel_vendor = Intel hw_accel_name = Intel Xeon E5-2697 v2 hw_accel_type = CPU hw_accel_connect = N/A hw_accel_ecc = Yes sw_accel_driver = None sw_file = Lustre 2.5 (DDN SFA12K) over QDR InifiBand sw_state = Run level 3 (Multi-User) sw_base_ptrsize = 64-bit sw_peak_ptrsize = Not Applicable sw_other = None hw_accel_desc000 = Intel Xeon E5-2697 v2 @ 2.7 GHz test_sponsor = Indiana University license_num = 3440A tester = Indiana University hw_avail = Apr-2013 sw_avail = Mar-2017 prepared_by = lijunj (is never output, only tags rawfile) hw_vendor = Cray hw_model = Cray XC30 hw_nthreadspercore = 2 hw_ncoresperchip = 12 hw_ncores = 24 hw_nchips = 2 hw_cpu_char000 = Intel Turbo Boost Technology off, hw_cpu_char001 = Hyper-threading off. hw_memory000 = 64 GB (8 x 8 GB 2Rx4 PC3-14900R-13, ECC) sw_compiler000 = Version 17.0.2.174 of Intel Parallel Studio XE sw_compiler001 = for Linux Build 20170213 sw_os000 = SUSE Linux Enterprise Server 11 (x86_64) sw_os001 = 3.0.101-0.46.1_1.0502.8871-cray_ari_c notes_plat_sysinfo_000 = Sysinfo program /N/dc2/projects/hpc/lijunj/spec/accel-1.2-run/br2p/Docs/sysinfo notes_plat_sysinfo_005 = $Rev: 6965 $ $Date:: 2015-04-21 #$ c05a7f14b1b1765e3fe1df68447e8a35 notes_plat_sysinfo_010 = running on nid00571 Sat Aug 12 19:56:51 2017 notes_plat_sysinfo_015 = notes_plat_sysinfo_020 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_025 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_030 = http://www.spec.org/accel/Docs/config.html#sysinfo notes_plat_sysinfo_035 = notes_plat_sysinfo_040 = From /proc/cpuinfo notes_plat_sysinfo_045 = model name : Intel(R) Xeon(R) CPU E5-2697 v2 @ 2.70GHz notes_plat_sysinfo_050 = 2 "physical id"s (chips) notes_plat_sysinfo_055 = 48 "processors" notes_plat_sysinfo_060 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_065 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_070 = caution.) notes_plat_sysinfo_075 = cpu cores : 12 notes_plat_sysinfo_080 = siblings : 24 notes_plat_sysinfo_085 = physical 0: cores 0 1 2 3 4 5 8 9 10 11 12 13 notes_plat_sysinfo_090 = physical 1: cores 0 1 2 3 4 5 8 9 10 11 12 13 notes_plat_sysinfo_095 = cache size : 30720 KB notes_plat_sysinfo_100 = notes_plat_sysinfo_105 = From /proc/meminfo notes_plat_sysinfo_110 = MemTotal: 66072376 kB notes_plat_sysinfo_115 = HugePages_Total: 0 notes_plat_sysinfo_120 = Hugepagesize: 2048 kB notes_plat_sysinfo_125 = notes_plat_sysinfo_130 = /usr/bin/lsb_release -d notes_plat_sysinfo_135 = SUSE Linux Enterprise Server 11 (x86_64) notes_plat_sysinfo_140 = notes_plat_sysinfo_145 = From /etc/*release* /etc/*version* notes_plat_sysinfo_150 = SuSE-release: notes_plat_sysinfo_155 = SUSE Linux Enterprise Server 11 (x86_64) notes_plat_sysinfo_160 = VERSION = 11 notes_plat_sysinfo_165 = PATCHLEVEL = 3 notes_plat_sysinfo_170 = notes_plat_sysinfo_175 = uname -a: notes_plat_sysinfo_180 = Linux nid00571 3.0.101-0.46.1_1.0502.8871-cray_ari_c #1 SMP Tue Jul 18 notes_plat_sysinfo_185 = 17:24:02 UTC 2017 x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_190 = notes_plat_sysinfo_195 = notes_plat_sysinfo_200 = SPEC is set to: /N/dc2/projects/hpc/lijunj/spec/accel-1.2-run/br2p notes_plat_sysinfo_205 = Filesystem Type Size Used Avail Use% Mounted notes_plat_sysinfo_210 = on notes_plat_sysinfo_215 = 10.10.0.171@o2ib:10.10.0.172@o2ib:/dc2 lustre 5.3P 5.0P 198T 97% /N/dc2 notes_plat_sysinfo_220 = notes_plat_sysinfo_225 = Cannot run dmidecode; consider saying 'chmod +s /usr/sbin/dmidecode' notes_plat_sysinfo_230 = notes_plat_sysinfo_235 = (End of data from sysinfo program) notes_plat_sysinfo_240 = (End of data from sysinfo program) # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: flagsurl000 = pgi2017_accel.xml hw_cpu_name = Intel Xeon E5-2697 v2 hw_cpu_mhz = 2700 hw_cpu_max_mhz = 2700 hw_fpu = Integrated hw_ncpuorder = 1-2 chips hw_pcache = 32 KB I + 32 KB D on chip per core hw_scache = 256 KB I+D on chip per core hw_tcache = 30 MB I+D on chip per chip hw_ocache = None hw_disk = None hw_other = None hw_accel_model = Intel Xeon E5-2697 v2 hw_accel_vendor = Intel hw_accel_name = Intel Xeon E5-2697 v2 hw_accel_type = CPU hw_accel_connect = N/A hw_accel_ecc = Yes sw_accel_driver = None sw_file = Lustre 2.5 (DDN SFA12K) over QDR InifiBand sw_state = Run level 3 (Multi-User) sw_base_ptrsize = 64-bit sw_peak_ptrsize = Not Applicable sw_other = None hw_accel_desc000 = Intel Xeon E5-2697 v2 @ 2.7 GHz test_sponsor = Indiana University license_num = 3440A tester = Indiana University hw_avail = Apr-2013 sw_avail = Mar-2017 prepared_by = lijunj (is never output, only tags rawfile) hw_vendor = Cray hw_model = Cray XC30 hw_nthreadspercore = 2 hw_ncoresperchip = 12 hw_ncores = 24 hw_nchips = 2 hw_cpu_char000 = Intel Turbo Boost Technology off, hw_cpu_char001 = Hyper-threading off. hw_memory000 = 64 GB (8 x 8 GB 2Rx4 PC3-14900R-13, ECC) sw_compiler000 = Version 17.0.2.174 of Intel Parallel Studio XE sw_compiler001 = for Linux Build 20170213 sw_os000 = SUSE Linux Enterprise Server 11 (x86_64) sw_os001 = 3.0.101-0.46.1_1.0502.8871-cray_ari_c notes_plat_sysinfo_000 = Sysinfo program /N/dc2/projects/hpc/lijunj/spec/accel-1.2-run/br2p/Docs/sysinfo notes_plat_sysinfo_005 = $Rev: 6965 $ $Date:: 2015-04-21 #$ c05a7f14b1b1765e3fe1df68447e8a35 notes_plat_sysinfo_010 = running on nid00571 Sat Aug 12 19:56:51 2017 notes_plat_sysinfo_015 = notes_plat_sysinfo_020 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_025 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_030 = http://www.spec.org/accel/Docs/config.html#sysinfo notes_plat_sysinfo_035 = notes_plat_sysinfo_040 = From /proc/cpuinfo notes_plat_sysinfo_045 = model name : Intel(R) Xeon(R) CPU E5-2697 v2 @ 2.70GHz notes_plat_sysinfo_050 = 2 "physical id"s (chips) notes_plat_sysinfo_055 = 48 "processors" notes_plat_sysinfo_060 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_065 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_070 = caution.) notes_plat_sysinfo_075 = cpu cores : 12 notes_plat_sysinfo_080 = siblings : 24 notes_plat_sysinfo_085 = physical 0: cores 0 1 2 3 4 5 8 9 10 11 12 13 notes_plat_sysinfo_090 = physical 1: cores 0 1 2 3 4 5 8 9 10 11 12 13 notes_plat_sysinfo_095 = cache size : 30720 KB notes_plat_sysinfo_100 = notes_plat_sysinfo_105 = From /proc/meminfo notes_plat_sysinfo_110 = MemTotal: 66072376 kB notes_plat_sysinfo_115 = HugePages_Total: 0 notes_plat_sysinfo_120 = Hugepagesize: 2048 kB notes_plat_sysinfo_125 = notes_plat_sysinfo_130 = /usr/bin/lsb_release -d notes_plat_sysinfo_135 = SUSE Linux Enterprise Server 11 (x86_64) notes_plat_sysinfo_140 = notes_plat_sysinfo_145 = From /etc/*release* /etc/*version* notes_plat_sysinfo_150 = SuSE-release: notes_plat_sysinfo_155 = SUSE Linux Enterprise Server 11 (x86_64) notes_plat_sysinfo_160 = VERSION = 11 notes_plat_sysinfo_165 = PATCHLEVEL = 3 notes_plat_sysinfo_170 = notes_plat_sysinfo_175 = uname -a: notes_plat_sysinfo_180 = Linux nid00571 3.0.101-0.46.1_1.0502.8871-cray_ari_c #1 SMP Tue Jul 18 notes_plat_sysinfo_185 = 17:24:02 UTC 2017 x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_190 = notes_plat_sysinfo_195 = notes_plat_sysinfo_200 = SPEC is set to: /N/dc2/projects/hpc/lijunj/spec/accel-1.2-run/br2p notes_plat_sysinfo_205 = Filesystem Type Size Used Avail Use% Mounted notes_plat_sysinfo_210 = on notes_plat_sysinfo_215 = 10.10.0.171@o2ib:10.10.0.172@o2ib:/dc2 lustre 5.3P 5.0P 198T 97% /N/dc2 notes_plat_sysinfo_220 = notes_plat_sysinfo_225 = Cannot run dmidecode; consider saying 'chmod +s /usr/sbin/dmidecode' notes_plat_sysinfo_230 = notes_plat_sysinfo_235 = (End of data from sysinfo program) notes_plat_sysinfo_240 = (End of data from sysinfo program) # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: flagsurl000 = pgi2017_accel.xml hw_cpu_name = Intel Xeon E5-2697 v2 hw_cpu_mhz = 2700 hw_cpu_max_mhz = 2700 hw_fpu = Integrated hw_ncpuorder = 1-2 chips hw_pcache = 32 KB I + 32 KB D on chip per core hw_scache = 256 KB I+D on chip per core hw_tcache = 30 MB I+D on chip per chip hw_ocache = None hw_disk = None hw_other = None hw_accel_model = Intel Xeon E5-2697 v2 hw_accel_vendor = Intel hw_accel_name = Intel Xeon E5-2697 v2 hw_accel_type = CPU hw_accel_connect = N/A hw_accel_ecc = Yes sw_accel_driver = None sw_file = Lustre 2.5 (DDN SFA12K) over QDR InifiBand sw_state = Run level 3 (multi-user) sw_base_ptrsize = 64-bit sw_peak_ptrsize = Not Applicable sw_other = None hw_accel_desc000 = Intel Xeon E5-2697 v2 @ 2.7 GHz test_sponsor = Indiana University license_num = 3440A tester = Indiana University hw_avail = Apr-2013 sw_avail = Mar-2017 prepared_by = lijunj (is never output, only tags rawfile) hw_vendor = Cray hw_model = Cray XC30 hw_nthreadspercore = 2 hw_ncoresperchip = 12 hw_ncores = 24 hw_nchips = 2 hw_cpu_char000 = Intel Turbo Boost Technology off, hw_cpu_char001 = Hyper-threading off. hw_memory000 = 64 GB (8 x 8 GB 2Rx4 PC3-14900R-13, ECC) sw_compiler000 = Version 17.0.2.174 of Intel Parallel Studio XE sw_compiler001 = for Linux Build 20170213 sw_os000 = SUSE Linux Enterprise Server 11 (x86_64) sw_os001 = 3.0.101-0.46.1_1.0502.8871-cray_ari_c notes_plat_sysinfo_000 = Sysinfo program /N/dc2/projects/hpc/lijunj/spec/accel-1.2-run/br2p/Docs/sysinfo notes_plat_sysinfo_005 = $Rev: 6965 $ $Date:: 2015-04-21 #$ c05a7f14b1b1765e3fe1df68447e8a35 notes_plat_sysinfo_010 = running on nid00571 Sat Aug 12 19:56:51 2017 notes_plat_sysinfo_015 = notes_plat_sysinfo_020 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_025 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_030 = http://www.spec.org/accel/Docs/config.html#sysinfo notes_plat_sysinfo_035 = notes_plat_sysinfo_040 = From /proc/cpuinfo notes_plat_sysinfo_045 = model name : Intel(R) Xeon(R) CPU E5-2697 v2 @ 2.70GHz notes_plat_sysinfo_050 = 2 "physical id"s (chips) notes_plat_sysinfo_055 = 48 "processors" notes_plat_sysinfo_060 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_065 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_070 = caution.) notes_plat_sysinfo_075 = cpu cores : 12 notes_plat_sysinfo_080 = siblings : 24 notes_plat_sysinfo_085 = physical 0: cores 0 1 2 3 4 5 8 9 10 11 12 13 notes_plat_sysinfo_090 = physical 1: cores 0 1 2 3 4 5 8 9 10 11 12 13 notes_plat_sysinfo_095 = cache size : 30720 KB notes_plat_sysinfo_100 = notes_plat_sysinfo_105 = From /proc/meminfo notes_plat_sysinfo_110 = MemTotal: 66072376 kB notes_plat_sysinfo_115 = HugePages_Total: 0 notes_plat_sysinfo_120 = Hugepagesize: 2048 kB notes_plat_sysinfo_125 = notes_plat_sysinfo_130 = /usr/bin/lsb_release -d notes_plat_sysinfo_135 = SUSE Linux Enterprise Server 11 (x86_64) notes_plat_sysinfo_140 = notes_plat_sysinfo_145 = From /etc/*release* /etc/*version* notes_plat_sysinfo_150 = SuSE-release: notes_plat_sysinfo_155 = SUSE Linux Enterprise Server 11 (x86_64) notes_plat_sysinfo_160 = VERSION = 11 notes_plat_sysinfo_165 = PATCHLEVEL = 3 notes_plat_sysinfo_170 = notes_plat_sysinfo_175 = uname -a: notes_plat_sysinfo_180 = Linux nid00571 3.0.101-0.46.1_1.0502.8871-cray_ari_c #1 SMP Tue Jul 18 notes_plat_sysinfo_185 = 17:24:02 UTC 2017 x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_190 = notes_plat_sysinfo_195 = notes_plat_sysinfo_200 = SPEC is set to: /N/dc2/projects/hpc/lijunj/spec/accel-1.2-run/br2p notes_plat_sysinfo_205 = Filesystem Type Size Used Avail Use% Mounted notes_plat_sysinfo_210 = on notes_plat_sysinfo_215 = 10.10.0.171@o2ib:10.10.0.172@o2ib:/dc2 lustre 5.3P 5.0P 198T 97% /N/dc2 notes_plat_sysinfo_220 = notes_plat_sysinfo_225 = Cannot run dmidecode; consider saying 'chmod +s /usr/sbin/dmidecode' notes_plat_sysinfo_230 = notes_plat_sysinfo_235 = (End of data from sysinfo program) notes_plat_sysinfo_240 = (End of data from sysinfo program) # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: flagsurl000 = pgi2017_accel.xml hw_cpu_name = Intel Xeon E5-2697 v2 hw_cpu_mhz = 2700 hw_cpu_max_mhz = 2700 hw_fpu = Integrated hw_ncpuorder = 1-2 chips hw_pcache = 32 KB I + 32 KB D on chip per core hw_scache = 256 KB I+D on chip per core hw_tcache = 30 MB I+D on chip per chip hw_ocache = None hw_disk = None hw_other = None hw_accel_model = Intel Xeon E5-2697 v2 hw_accel_vendor = Intel hw_accel_name = Intel Xeon E5-2697 v2 hw_accel_type = CPU hw_accel_connect = N/A hw_accel_ecc = Yes sw_accel_driver = None sw_file = Lustre 2.5 (DDN SFA12K) over QDR InifiBand sw_state = Run level 3 (multi-user) sw_base_ptrsize = 64-bit sw_peak_ptrsize = Not Applicable sw_other = None hw_accel_desc000 = Intel Xeon E5-2697 v2 @ 2.7 GHz test_sponsor = Indiana University license_num = 3440A tester = Indiana University hw_avail = Apr-2013 sw_avail = Mar-2017 prepared_by = lijunj (is never output, only tags rawfile) hw_vendor = Cray hw_model = Cray XC30 hw_nthreadspercore = 2 hw_ncoresperchip = 12 hw_ncores = 24 hw_nchips = 2 hw_cpu_char000 = Intel Turbo Boost Technology off, hw_cpu_char001 = Hyper-threading on. hw_memory000 = 64 GB (8 x 8 GB 2Rx4 PC3-14900R-13, ECC) sw_compiler000 = Version 17.0.2.174 of Intel Parallel Studio XE sw_compiler001 = for Linux Build 20170213 sw_os000 = SUSE Linux Enterprise Server 11 (x86_64) sw_os001 = 3.0.101-0.46.1_1.0502.8871-cray_ari_c notes_plat_sysinfo_000 = Sysinfo program /N/dc2/projects/hpc/lijunj/spec/accel-1.2-run/br2p/Docs/sysinfo notes_plat_sysinfo_005 = $Rev: 6965 $ $Date:: 2015-04-21 #$ c05a7f14b1b1765e3fe1df68447e8a35 notes_plat_sysinfo_010 = running on nid00571 Sat Aug 12 19:56:51 2017 notes_plat_sysinfo_015 = notes_plat_sysinfo_020 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_025 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_030 = http://www.spec.org/accel/Docs/config.html#sysinfo notes_plat_sysinfo_035 = notes_plat_sysinfo_040 = From /proc/cpuinfo notes_plat_sysinfo_045 = model name : Intel(R) Xeon(R) CPU E5-2697 v2 @ 2.70GHz notes_plat_sysinfo_050 = 2 "physical id"s (chips) notes_plat_sysinfo_055 = 48 "processors" notes_plat_sysinfo_060 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_065 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_070 = caution.) notes_plat_sysinfo_075 = cpu cores : 12 notes_plat_sysinfo_080 = siblings : 24 notes_plat_sysinfo_085 = physical 0: cores 0 1 2 3 4 5 8 9 10 11 12 13 notes_plat_sysinfo_090 = physical 1: cores 0 1 2 3 4 5 8 9 10 11 12 13 notes_plat_sysinfo_095 = cache size : 30720 KB notes_plat_sysinfo_100 = notes_plat_sysinfo_105 = From /proc/meminfo notes_plat_sysinfo_110 = MemTotal: 66072376 kB notes_plat_sysinfo_115 = HugePages_Total: 0 notes_plat_sysinfo_120 = Hugepagesize: 2048 kB notes_plat_sysinfo_125 = notes_plat_sysinfo_130 = /usr/bin/lsb_release -d notes_plat_sysinfo_135 = SUSE Linux Enterprise Server 11 (x86_64) notes_plat_sysinfo_140 = notes_plat_sysinfo_145 = From /etc/*release* /etc/*version* notes_plat_sysinfo_150 = SuSE-release: notes_plat_sysinfo_155 = SUSE Linux Enterprise Server 11 (x86_64) notes_plat_sysinfo_160 = VERSION = 11 notes_plat_sysinfo_165 = PATCHLEVEL = 3 notes_plat_sysinfo_170 = notes_plat_sysinfo_175 = uname -a: notes_plat_sysinfo_180 = Linux nid00571 3.0.101-0.46.1_1.0502.8871-cray_ari_c #1 SMP Tue Jul 18 notes_plat_sysinfo_185 = 17:24:02 UTC 2017 x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_190 = notes_plat_sysinfo_195 = notes_plat_sysinfo_200 = SPEC is set to: /N/dc2/projects/hpc/lijunj/spec/accel-1.2-run/br2p notes_plat_sysinfo_205 = Filesystem Type Size Used Avail Use% Mounted notes_plat_sysinfo_210 = on notes_plat_sysinfo_215 = 10.10.0.171@o2ib:10.10.0.172@o2ib:/dc2 lustre 5.3P 5.0P 198T 97% /N/dc2 notes_plat_sysinfo_220 = notes_plat_sysinfo_225 = Cannot run dmidecode; consider saying 'chmod +s /usr/sbin/dmidecode' notes_plat_sysinfo_230 = notes_plat_sysinfo_235 = (End of data from sysinfo program) notes_plat_sysinfo_240 = (End of data from sysinfo program) # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: flagsurl000 = https://www.spec.org/accel/flags/pgi2017_flags.20170830.xml hw_cpu_name = Intel Xeon E5-2697 v2 hw_cpu_mhz = 2700 hw_cpu_max_mhz = 2700 hw_fpu = Integrated hw_ncpuorder = 1-2 chips hw_pcache = 32 KB I + 32 KB D on chip per core hw_scache = 256 KB I+D on chip per core hw_tcache = 30 MB I+D on chip per chip hw_ocache = None hw_disk = None hw_other = None hw_accel_model = Intel Xeon E5-2697 v2 hw_accel_vendor = Intel hw_accel_name = Intel Xeon E5-2697 v2 hw_accel_type = CPU hw_accel_connect = N/A hw_accel_ecc = Yes sw_accel_driver = None sw_file = Lustre 2.5 (DDN SFA12K) over QDR InfiniBand sw_state = Run level 3 (multi-user) sw_base_ptrsize = 64-bit sw_peak_ptrsize = Not Applicable sw_other = None hw_accel_desc000 = Intel Xeon E5-2697 v2 @ 2.7 GHz test_sponsor = Indiana University license_num = 3440A tester = Indiana University hw_avail = Apr-2013 sw_avail = May-2017 prepared_by = lijunj (is never output, only tags rawfile) hw_vendor = Cray hw_model = Cray XC30 hw_nthreadspercore = 2 hw_ncoresperchip = 12 hw_ncores = 24 hw_nchips = 2 hw_cpu_char000 = Intel Turbo Boost Technology off, hw_cpu_char001 = Hyper-threading on. hw_memory000 = 64 GB (8 x 8 GB 2Rx4 PC3-14900R-13, ECC) sw_compiler000 = PGI Professional Edition, Release 17.5 sw_os000 = SUSE Linux Enterprise Server 11 (x86_64), sw_os001 = Cray Linux Environment 5.2, sw_os002 = 3.0.101-0.46.1_1.0502.8871-cray_ari_c notes_plat_sysinfo_000 = Sysinfo program /N/dc2/projects/hpc/lijunj/spec/accel-1.2-run/br2p/Docs/sysinfo notes_plat_sysinfo_005 = $Rev: 6965 $ $Date:: 2015-04-21 #$ c05a7f14b1b1765e3fe1df68447e8a35 notes_plat_sysinfo_010 = running on nid00571 Sat Aug 12 19:56:51 2017 notes_plat_sysinfo_015 = notes_plat_sysinfo_020 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_025 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_030 = http://www.spec.org/accel/Docs/config.html#sysinfo notes_plat_sysinfo_035 = notes_plat_sysinfo_040 = From /proc/cpuinfo notes_plat_sysinfo_045 = model name : Intel(R) Xeon(R) CPU E5-2697 v2 @ 2.70GHz notes_plat_sysinfo_050 = 2 "physical id"s (chips) notes_plat_sysinfo_055 = 48 "processors" notes_plat_sysinfo_060 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_065 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_070 = caution.) notes_plat_sysinfo_075 = cpu cores : 12 notes_plat_sysinfo_080 = siblings : 24 notes_plat_sysinfo_085 = physical 0: cores 0 1 2 3 4 5 8 9 10 11 12 13 notes_plat_sysinfo_090 = physical 1: cores 0 1 2 3 4 5 8 9 10 11 12 13 notes_plat_sysinfo_095 = cache size : 30720 KB notes_plat_sysinfo_100 = notes_plat_sysinfo_105 = From /proc/meminfo notes_plat_sysinfo_110 = MemTotal: 66072376 kB notes_plat_sysinfo_115 = HugePages_Total: 0 notes_plat_sysinfo_120 = Hugepagesize: 2048 kB notes_plat_sysinfo_125 = notes_plat_sysinfo_130 = /usr/bin/lsb_release -d notes_plat_sysinfo_135 = SUSE Linux Enterprise Server 11 (x86_64) notes_plat_sysinfo_140 = notes_plat_sysinfo_145 = From /etc/*release* /etc/*version* notes_plat_sysinfo_150 = SuSE-release: notes_plat_sysinfo_155 = SUSE Linux Enterprise Server 11 (x86_64) notes_plat_sysinfo_160 = VERSION = 11 notes_plat_sysinfo_165 = PATCHLEVEL = 3 notes_plat_sysinfo_170 = notes_plat_sysinfo_175 = uname -a: notes_plat_sysinfo_180 = Linux nid00571 3.0.101-0.46.1_1.0502.8871-cray_ari_c #1 SMP Tue Jul 18 notes_plat_sysinfo_185 = 17:24:02 UTC 2017 x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_190 = notes_plat_sysinfo_195 = notes_plat_sysinfo_200 = SPEC is set to: /N/dc2/projects/hpc/lijunj/spec/accel-1.2-run/br2p notes_plat_sysinfo_205 = Filesystem Type Size Used Avail Use% Mounted notes_plat_sysinfo_210 = on notes_plat_sysinfo_215 = 10.10.0.171@o2ib:10.10.0.172@o2ib:/dc2 lustre 5.3P 5.0P 198T 97% /N/dc2 notes_plat_sysinfo_220 = notes_plat_sysinfo_225 = Cannot run dmidecode; consider saying 'chmod +s /usr/sbin/dmidecode' notes_plat_sysinfo_230 = notes_plat_sysinfo_235 = (End of data from sysinfo program) notes_plat_sysinfo_240 = (End of data from sysinfo program)