# Invocation command line: # /lustre/atlas2/stf006/scratch/vgv/spec/accel/kit75summitdev/bin/runspec --config summitdev-accel-acc-pgi --action validate openacc --reportable # output_root was not used for this run ############################################################################ ext = pgi default=default=default=default: CC = pgcc CXX = pgc++ FC = pgfortran F77 = pgfortran # # Compiler flags for base level optimisation # openacc=default=default=default: OPTIMIZE = -fast -Mfprelaxed -acc -ta=tesla:cc60,cuda8.0 # # Portability flags for each benchmark # #351.palm=peak=default=default: #PORTABILITY = -DSPEC_HOST_FFTW3 #FOPTIMIZE = -acc=noautopar -ta=tesla:cc35,cuda5.5,fastmath -I$(SPEC)/fftw333/include #LIBS = -L$(SPEC)/fftw333/lib -lfftw3 359.miniGhost=default=default=default: EXTRA_LDFLAGS += -Mnomain # The following settings were obtained by running 'specperl $[top]/Docs/sysinfo' default: notes_plat_sysinfo_000 = Sysinfo program notes_plat_sysinfo_005 = /lustre/atlas2/stf006/scratch/vgv/spec/accel/kit75summitdev/Docs/sysinfo notes_plat_sysinfo_010 = $Rev: 6965 $ $Date:: 2015-04-21 #$ c05a7f14b1b1765e3fe1df68447e8a35 notes_plat_sysinfo_015 = running on summitdev-r0c2n09 Tue May 9 19:25:53 2017 notes_plat_sysinfo_020 = notes_plat_sysinfo_025 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_030 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_035 = http://www.spec.org/accel/Docs/config.html#sysinfo notes_plat_sysinfo_040 = notes_plat_sysinfo_045 = From /proc/cpuinfo notes_plat_sysinfo_050 = clock : 2394.000000MHz notes_plat_sysinfo_055 = clock : 2427.000000MHz notes_plat_sysinfo_060 = clock : 2460.000000MHz notes_plat_sysinfo_065 = clock : 2626.000000MHz notes_plat_sysinfo_070 = clock : 2726.000000MHz notes_plat_sysinfo_075 = clock : 2926.000000MHz notes_plat_sysinfo_080 = machine : PowerNV 8335-GTB notes_plat_sysinfo_085 = model : 8335-GTB notes_plat_sysinfo_090 = platform : PowerNV notes_plat_sysinfo_095 = revision : 1.0 (pvr 004c 0100) notes_plat_sysinfo_100 = cpu : POWER8NVL (raw), altivec supported notes_plat_sysinfo_105 = * notes_plat_sysinfo_110 = * 0 "physical id" tags found. Perhaps this is an older system, notes_plat_sysinfo_115 = * or a virtualized system. Not attempting to guess how to notes_plat_sysinfo_120 = * count chips/cores for this system. notes_plat_sysinfo_125 = * notes_plat_sysinfo_130 = 160 "processors" notes_plat_sysinfo_135 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_140 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_145 = caution.) notes_plat_sysinfo_150 = notes_plat_sysinfo_155 = From /proc/meminfo notes_plat_sysinfo_160 = MemTotal: 266799296 kB notes_plat_sysinfo_165 = HugePages_Total: 0 notes_plat_sysinfo_170 = Hugepagesize: 16384 kB notes_plat_sysinfo_175 = notes_plat_sysinfo_180 = From /etc/*release* /etc/*version* notes_plat_sysinfo_185 = os-release: notes_plat_sysinfo_190 = NAME="Red Hat Enterprise Linux Server" notes_plat_sysinfo_195 = VERSION="7.3 (Maipo)" notes_plat_sysinfo_200 = ID="rhel" notes_plat_sysinfo_205 = ID_LIKE="fedora" notes_plat_sysinfo_210 = VERSION_ID="7.3" notes_plat_sysinfo_215 = PRETTY_NAME="Red Hat Enterprise Linux Server 7.3 (Maipo)" notes_plat_sysinfo_220 = ANSI_COLOR="0;31" notes_plat_sysinfo_225 = CPE_NAME="cpe:/o:redhat:enterprise_linux:7.3:GA:server" notes_plat_sysinfo_230 = redhat-release: Red Hat Enterprise Linux Server release 7.3 (Maipo) notes_plat_sysinfo_235 = system-release: Red Hat Enterprise Linux Server release 7.3 (Maipo) notes_plat_sysinfo_240 = system-release-cpe: cpe:/o:redhat:enterprise_linux:7.3:ga:server notes_plat_sysinfo_245 = notes_plat_sysinfo_250 = uname -a: notes_plat_sysinfo_255 = Linux summitdev-r0c2n09 3.10.0-514.el7.ppc64le #1 SMP Wed Oct 19 11:27:06 EDT notes_plat_sysinfo_260 = 2016 ppc64le ppc64le ppc64le GNU/Linux notes_plat_sysinfo_265 = notes_plat_sysinfo_270 = run-level 5 Apr 26 16:49 notes_plat_sysinfo_275 = notes_plat_sysinfo_280 = SPEC is set to: /lustre/atlas2/stf006/scratch/vgv/spec/accel/kit75summitdev notes_plat_sysinfo_285 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_290 = 10.36.226.77@o2ib:/atlas2 lustre 14P 7.3P 5.9P 56% /lustre/atlas2 notes_plat_sysinfo_295 = notes_plat_sysinfo_300 = (End of data from sysinfo program) hw_cpu_name = POWER8NVL (raw), altivec supported hw_disk = 14P add more disk info here hw_memory000 = 254.440 GB fixme: If using DDR3, format is: hw_memory001 = 'N GB (M x N GB nRxn PCn-nnnnnR-n, ECC)' hw_nchips = could not determine prepared_by = vgv (is never output, only tags rawfile) sw_file = lustre sw_os000 = Red Hat Enterprise Linux Server release 7.3 sw_os001 = (Maipo) sw_os002 = 3.10.0-514.el7.ppc64le sw_state = Run level 5 (add definition here) # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: sw_peak_ptrsize = Not Applicable # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: flagsurl000 = ./pgi2017_flags.xml hw_cpu_name = POWER8NVL (raw), altivec supported hw_disk = 14P add more disk info here sw_file = lustre sw_state = Run level 5 (add definition here) sw_peak_ptrsize = Not Applicable hw_memory000 = 254.440 GB fixme: If using DDR3, format is: hw_memory001 = 'N GB (M x N GB nRxn PCn-nnnnnR-n, ECC)' hw_nchips = could not determine prepared_by = vgv (is never output, only tags rawfile) sw_os000 = Red Hat Enterprise Linux Server release 7.3 sw_os001 = (Maipo) sw_os002 = 3.10.0-514.el7.ppc64le notes_plat_sysinfo_000 = Sysinfo program notes_plat_sysinfo_005 = /lustre/atlas2/stf006/scratch/vgv/spec/accel/kit75summitdev/Docs/sysinfo notes_plat_sysinfo_010 = $Rev: 6965 $ $Date:: 2015-04-21 #$ c05a7f14b1b1765e3fe1df68447e8a35 notes_plat_sysinfo_015 = running on summitdev-r0c2n09 Tue May 9 19:25:53 2017 notes_plat_sysinfo_020 = notes_plat_sysinfo_025 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_030 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_035 = http://www.spec.org/accel/Docs/config.html#sysinfo notes_plat_sysinfo_040 = notes_plat_sysinfo_045 = From /proc/cpuinfo notes_plat_sysinfo_050 = clock : 2394.000000MHz notes_plat_sysinfo_055 = clock : 2427.000000MHz notes_plat_sysinfo_060 = clock : 2460.000000MHz notes_plat_sysinfo_065 = clock : 2626.000000MHz notes_plat_sysinfo_070 = clock : 2726.000000MHz notes_plat_sysinfo_075 = clock : 2926.000000MHz notes_plat_sysinfo_080 = machine : PowerNV 8335-GTB notes_plat_sysinfo_085 = model : 8335-GTB notes_plat_sysinfo_090 = platform : PowerNV notes_plat_sysinfo_095 = revision : 1.0 (pvr 004c 0100) notes_plat_sysinfo_100 = cpu : POWER8NVL (raw), altivec supported notes_plat_sysinfo_105 = * notes_plat_sysinfo_110 = * 0 "physical id" tags found. Perhaps this is an older system, notes_plat_sysinfo_115 = * or a virtualized system. Not attempting to guess how to notes_plat_sysinfo_120 = * count chips/cores for this system. notes_plat_sysinfo_125 = * notes_plat_sysinfo_130 = 160 "processors" notes_plat_sysinfo_135 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_140 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_145 = caution.) notes_plat_sysinfo_150 = notes_plat_sysinfo_155 = From /proc/meminfo notes_plat_sysinfo_160 = MemTotal: 266799296 kB notes_plat_sysinfo_165 = HugePages_Total: 0 notes_plat_sysinfo_170 = Hugepagesize: 16384 kB notes_plat_sysinfo_175 = notes_plat_sysinfo_180 = From /etc/*release* /etc/*version* notes_plat_sysinfo_185 = os-release: notes_plat_sysinfo_190 = NAME="Red Hat Enterprise Linux Server" notes_plat_sysinfo_195 = VERSION="7.3 (Maipo)" notes_plat_sysinfo_200 = ID="rhel" notes_plat_sysinfo_205 = ID_LIKE="fedora" notes_plat_sysinfo_210 = VERSION_ID="7.3" notes_plat_sysinfo_215 = PRETTY_NAME="Red Hat Enterprise Linux Server 7.3 (Maipo)" notes_plat_sysinfo_220 = ANSI_COLOR="0;31" notes_plat_sysinfo_225 = CPE_NAME="cpe:/o:redhat:enterprise_linux:7.3:GA:server" notes_plat_sysinfo_230 = redhat-release: Red Hat Enterprise Linux Server release 7.3 (Maipo) notes_plat_sysinfo_235 = system-release: Red Hat Enterprise Linux Server release 7.3 (Maipo) notes_plat_sysinfo_240 = system-release-cpe: cpe:/o:redhat:enterprise_linux:7.3:ga:server notes_plat_sysinfo_245 = notes_plat_sysinfo_250 = uname -a: notes_plat_sysinfo_255 = Linux summitdev-r0c2n09 3.10.0-514.el7.ppc64le #1 SMP Wed Oct 19 11:27:06 EDT notes_plat_sysinfo_260 = 2016 ppc64le ppc64le ppc64le GNU/Linux notes_plat_sysinfo_265 = notes_plat_sysinfo_270 = run-level 5 Apr 26 16:49 notes_plat_sysinfo_275 = notes_plat_sysinfo_280 = SPEC is set to: /lustre/atlas2/stf006/scratch/vgv/spec/accel/kit75summitdev notes_plat_sysinfo_285 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_290 = 10.36.226.77@o2ib:/atlas2 lustre 14P 7.3P 5.9P 56% /lustre/atlas2 notes_plat_sysinfo_295 = notes_plat_sysinfo_300 = (End of data from sysinfo program) # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: flagsurl000 = ./pgi2017_flags.xml hw_avail = Dec-2016 prepared_by = vgv (is never output, only tags rawfile) hw_nchips = could not determine hw_cpu_name = POWER8NVL (raw), altivec supported hw_cpu_max_mhz = 2061 hw_disk = 14P add more disk info here sw_file = lustre sw_state = Run level 5 (add definition here) sw_peak_ptrsize = Not Applicable hw_memory000 = 254.440 GB fixme: If using DDR3, format is: hw_memory001 = 'N GB (M x N GB nRxn PCn-nnnnnR-n, ECC)' sw_os000 = Red Hat Enterprise Linux Server release 7.3 sw_os001 = (Maipo) sw_os002 = 3.10.0-514.el7.ppc64le notes_plat_sysinfo_000 = Sysinfo program notes_plat_sysinfo_005 = /lustre/atlas2/stf006/scratch/vgv/spec/accel/kit75summitdev/Docs/sysinfo notes_plat_sysinfo_010 = $Rev: 6965 $ $Date:: 2015-04-21 #$ c05a7f14b1b1765e3fe1df68447e8a35 notes_plat_sysinfo_015 = running on summitdev-r0c2n09 Tue May 9 19:25:53 2017 notes_plat_sysinfo_020 = notes_plat_sysinfo_025 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_030 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_035 = http://www.spec.org/accel/Docs/config.html#sysinfo notes_plat_sysinfo_040 = notes_plat_sysinfo_045 = From /proc/cpuinfo notes_plat_sysinfo_050 = clock : 2394.000000MHz notes_plat_sysinfo_055 = clock : 2427.000000MHz notes_plat_sysinfo_060 = clock : 2460.000000MHz notes_plat_sysinfo_065 = clock : 2626.000000MHz notes_plat_sysinfo_070 = clock : 2726.000000MHz notes_plat_sysinfo_075 = clock : 2926.000000MHz notes_plat_sysinfo_080 = machine : PowerNV 8335-GTB notes_plat_sysinfo_085 = model : 8335-GTB notes_plat_sysinfo_090 = platform : PowerNV notes_plat_sysinfo_095 = revision : 1.0 (pvr 004c 0100) notes_plat_sysinfo_100 = cpu : POWER8NVL (raw), altivec supported notes_plat_sysinfo_105 = * notes_plat_sysinfo_110 = * 0 "physical id" tags found. Perhaps this is an older system, notes_plat_sysinfo_115 = * or a virtualized system. Not attempting to guess how to notes_plat_sysinfo_120 = * count chips/cores for this system. notes_plat_sysinfo_125 = * notes_plat_sysinfo_130 = 160 "processors" notes_plat_sysinfo_135 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_140 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_145 = caution.) notes_plat_sysinfo_150 = notes_plat_sysinfo_155 = From /proc/meminfo notes_plat_sysinfo_160 = MemTotal: 266799296 kB notes_plat_sysinfo_165 = HugePages_Total: 0 notes_plat_sysinfo_170 = Hugepagesize: 16384 kB notes_plat_sysinfo_175 = notes_plat_sysinfo_180 = From /etc/*release* /etc/*version* notes_plat_sysinfo_185 = os-release: notes_plat_sysinfo_190 = NAME="Red Hat Enterprise Linux Server" notes_plat_sysinfo_195 = VERSION="7.3 (Maipo)" notes_plat_sysinfo_200 = ID="rhel" notes_plat_sysinfo_205 = ID_LIKE="fedora" notes_plat_sysinfo_210 = VERSION_ID="7.3" notes_plat_sysinfo_215 = PRETTY_NAME="Red Hat Enterprise Linux Server 7.3 (Maipo)" notes_plat_sysinfo_220 = ANSI_COLOR="0;31" notes_plat_sysinfo_225 = CPE_NAME="cpe:/o:redhat:enterprise_linux:7.3:GA:server" notes_plat_sysinfo_230 = redhat-release: Red Hat Enterprise Linux Server release 7.3 (Maipo) notes_plat_sysinfo_235 = system-release: Red Hat Enterprise Linux Server release 7.3 (Maipo) notes_plat_sysinfo_240 = system-release-cpe: cpe:/o:redhat:enterprise_linux:7.3:ga:server notes_plat_sysinfo_245 = notes_plat_sysinfo_250 = uname -a: notes_plat_sysinfo_255 = Linux summitdev-r0c2n09 3.10.0-514.el7.ppc64le #1 SMP Wed Oct 19 11:27:06 EDT notes_plat_sysinfo_260 = 2016 ppc64le ppc64le ppc64le GNU/Linux notes_plat_sysinfo_265 = notes_plat_sysinfo_270 = run-level 5 Apr 26 16:49 notes_plat_sysinfo_275 = notes_plat_sysinfo_280 = SPEC is set to: /lustre/atlas2/stf006/scratch/vgv/spec/accel/kit75summitdev notes_plat_sysinfo_285 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_290 = 10.36.226.77@o2ib:/atlas2 lustre 14P 7.3P 5.9P 56% /lustre/atlas2 notes_plat_sysinfo_295 = notes_plat_sysinfo_300 = (End of data from sysinfo program) # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: flagsurl000 = ./pgi2017_flags.xml hw_avail = Dec-2016 prepared_by = vgv (is never output, only tags rawfile) hw_nchips = could not determine hw_cpu_name = POWER8NVL (raw), altivec supported hw_cpu_mhz = 2061 hw_disk = 14P add more disk info here sw_file = lustre sw_state = Run level 5 (add definition here) sw_peak_ptrsize = Not Applicable hw_memory000 = 254.440 GB fixme: If using DDR3, format is: hw_memory001 = 'N GB (M x N GB nRxn PCn-nnnnnR-n, ECC)' sw_os000 = Red Hat Enterprise Linux Server release 7.3 sw_os001 = (Maipo) sw_os002 = 3.10.0-514.el7.ppc64le notes_plat_sysinfo_000 = Sysinfo program notes_plat_sysinfo_005 = /lustre/atlas2/stf006/scratch/vgv/spec/accel/kit75summitdev/Docs/sysinfo notes_plat_sysinfo_010 = $Rev: 6965 $ $Date:: 2015-04-21 #$ c05a7f14b1b1765e3fe1df68447e8a35 notes_plat_sysinfo_015 = running on summitdev-r0c2n09 Tue May 9 19:25:53 2017 notes_plat_sysinfo_020 = notes_plat_sysinfo_025 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_030 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_035 = http://www.spec.org/accel/Docs/config.html#sysinfo notes_plat_sysinfo_040 = notes_plat_sysinfo_045 = From /proc/cpuinfo notes_plat_sysinfo_050 = clock : 2394.000000MHz notes_plat_sysinfo_055 = clock : 2427.000000MHz notes_plat_sysinfo_060 = clock : 2460.000000MHz notes_plat_sysinfo_065 = clock : 2626.000000MHz notes_plat_sysinfo_070 = clock : 2726.000000MHz notes_plat_sysinfo_075 = clock : 2926.000000MHz notes_plat_sysinfo_080 = machine : PowerNV 8335-GTB notes_plat_sysinfo_085 = model : 8335-GTB notes_plat_sysinfo_090 = platform : PowerNV notes_plat_sysinfo_095 = revision : 1.0 (pvr 004c 0100) notes_plat_sysinfo_100 = cpu : POWER8NVL (raw), altivec supported notes_plat_sysinfo_105 = * notes_plat_sysinfo_110 = * 0 "physical id" tags found. Perhaps this is an older system, notes_plat_sysinfo_115 = * or a virtualized system. Not attempting to guess how to notes_plat_sysinfo_120 = * count chips/cores for this system. notes_plat_sysinfo_125 = * notes_plat_sysinfo_130 = 160 "processors" notes_plat_sysinfo_135 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_140 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_145 = caution.) notes_plat_sysinfo_150 = notes_plat_sysinfo_155 = From /proc/meminfo notes_plat_sysinfo_160 = MemTotal: 266799296 kB notes_plat_sysinfo_165 = HugePages_Total: 0 notes_plat_sysinfo_170 = Hugepagesize: 16384 kB notes_plat_sysinfo_175 = notes_plat_sysinfo_180 = From /etc/*release* /etc/*version* notes_plat_sysinfo_185 = os-release: notes_plat_sysinfo_190 = NAME="Red Hat Enterprise Linux Server" notes_plat_sysinfo_195 = VERSION="7.3 (Maipo)" notes_plat_sysinfo_200 = ID="rhel" notes_plat_sysinfo_205 = ID_LIKE="fedora" notes_plat_sysinfo_210 = VERSION_ID="7.3" notes_plat_sysinfo_215 = PRETTY_NAME="Red Hat Enterprise Linux Server 7.3 (Maipo)" notes_plat_sysinfo_220 = ANSI_COLOR="0;31" notes_plat_sysinfo_225 = CPE_NAME="cpe:/o:redhat:enterprise_linux:7.3:GA:server" notes_plat_sysinfo_230 = redhat-release: Red Hat Enterprise Linux Server release 7.3 (Maipo) notes_plat_sysinfo_235 = system-release: Red Hat Enterprise Linux Server release 7.3 (Maipo) notes_plat_sysinfo_240 = system-release-cpe: cpe:/o:redhat:enterprise_linux:7.3:ga:server notes_plat_sysinfo_245 = notes_plat_sysinfo_250 = uname -a: notes_plat_sysinfo_255 = Linux summitdev-r0c2n09 3.10.0-514.el7.ppc64le #1 SMP Wed Oct 19 11:27:06 EDT notes_plat_sysinfo_260 = 2016 ppc64le ppc64le ppc64le GNU/Linux notes_plat_sysinfo_265 = notes_plat_sysinfo_270 = run-level 5 Apr 26 16:49 notes_plat_sysinfo_275 = notes_plat_sysinfo_280 = SPEC is set to: /lustre/atlas2/stf006/scratch/vgv/spec/accel/kit75summitdev notes_plat_sysinfo_285 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_290 = 10.36.226.77@o2ib:/atlas2 lustre 14P 7.3P 5.9P 56% /lustre/atlas2 notes_plat_sysinfo_295 = notes_plat_sysinfo_300 = (End of data from sysinfo program) # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: flagsurl000 = ./pgi2017_flags.xml hw_avail = Dec-2016 prepared_by = vgv (is never output, only tags rawfile) hw_nchips = could not determine hw_cpu_name = POWER8NVL (raw), altivec supported hw_cpu_mhz = 2061 hw_disk = 14P add more disk info here sw_file = lustre sw_state = Run level 5 (add definition here) sw_peak_ptrsize = Not Applicable hw_memory000 = 260546 MB sw_os000 = Red Hat Enterprise Linux Server release 7.3 sw_os001 = (Maipo) sw_os002 = 3.10.0-514.el7.ppc64le notes_plat_sysinfo_000 = Sysinfo program notes_plat_sysinfo_005 = /lustre/atlas2/stf006/scratch/vgv/spec/accel/kit75summitdev/Docs/sysinfo notes_plat_sysinfo_010 = $Rev: 6965 $ $Date:: 2015-04-21 #$ c05a7f14b1b1765e3fe1df68447e8a35 notes_plat_sysinfo_015 = running on summitdev-r0c2n09 Tue May 9 19:25:53 2017 notes_plat_sysinfo_020 = notes_plat_sysinfo_025 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_030 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_035 = http://www.spec.org/accel/Docs/config.html#sysinfo notes_plat_sysinfo_040 = notes_plat_sysinfo_045 = From /proc/cpuinfo notes_plat_sysinfo_050 = clock : 2394.000000MHz notes_plat_sysinfo_055 = clock : 2427.000000MHz notes_plat_sysinfo_060 = clock : 2460.000000MHz notes_plat_sysinfo_065 = clock : 2626.000000MHz notes_plat_sysinfo_070 = clock : 2726.000000MHz notes_plat_sysinfo_075 = clock : 2926.000000MHz notes_plat_sysinfo_080 = machine : PowerNV 8335-GTB notes_plat_sysinfo_085 = model : 8335-GTB notes_plat_sysinfo_090 = platform : PowerNV notes_plat_sysinfo_095 = revision : 1.0 (pvr 004c 0100) notes_plat_sysinfo_100 = cpu : POWER8NVL (raw), altivec supported notes_plat_sysinfo_105 = * notes_plat_sysinfo_110 = * 0 "physical id" tags found. Perhaps this is an older system, notes_plat_sysinfo_115 = * or a virtualized system. Not attempting to guess how to notes_plat_sysinfo_120 = * count chips/cores for this system. notes_plat_sysinfo_125 = * notes_plat_sysinfo_130 = 160 "processors" notes_plat_sysinfo_135 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_140 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_145 = caution.) notes_plat_sysinfo_150 = notes_plat_sysinfo_155 = From /proc/meminfo notes_plat_sysinfo_160 = MemTotal: 266799296 kB notes_plat_sysinfo_165 = HugePages_Total: 0 notes_plat_sysinfo_170 = Hugepagesize: 16384 kB notes_plat_sysinfo_175 = notes_plat_sysinfo_180 = From /etc/*release* /etc/*version* notes_plat_sysinfo_185 = os-release: notes_plat_sysinfo_190 = NAME="Red Hat Enterprise Linux Server" notes_plat_sysinfo_195 = VERSION="7.3 (Maipo)" notes_plat_sysinfo_200 = ID="rhel" notes_plat_sysinfo_205 = ID_LIKE="fedora" notes_plat_sysinfo_210 = VERSION_ID="7.3" notes_plat_sysinfo_215 = PRETTY_NAME="Red Hat Enterprise Linux Server 7.3 (Maipo)" notes_plat_sysinfo_220 = ANSI_COLOR="0;31" notes_plat_sysinfo_225 = CPE_NAME="cpe:/o:redhat:enterprise_linux:7.3:GA:server" notes_plat_sysinfo_230 = redhat-release: Red Hat Enterprise Linux Server release 7.3 (Maipo) notes_plat_sysinfo_235 = system-release: Red Hat Enterprise Linux Server release 7.3 (Maipo) notes_plat_sysinfo_240 = system-release-cpe: cpe:/o:redhat:enterprise_linux:7.3:ga:server notes_plat_sysinfo_245 = notes_plat_sysinfo_250 = uname -a: notes_plat_sysinfo_255 = Linux summitdev-r0c2n09 3.10.0-514.el7.ppc64le #1 SMP Wed Oct 19 11:27:06 EDT notes_plat_sysinfo_260 = 2016 ppc64le ppc64le ppc64le GNU/Linux notes_plat_sysinfo_265 = notes_plat_sysinfo_270 = run-level 5 Apr 26 16:49 notes_plat_sysinfo_275 = notes_plat_sysinfo_280 = SPEC is set to: /lustre/atlas2/stf006/scratch/vgv/spec/accel/kit75summitdev notes_plat_sysinfo_285 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_290 = 10.36.226.77@o2ib:/atlas2 lustre 14P 7.3P 5.9P 56% /lustre/atlas2 notes_plat_sysinfo_295 = notes_plat_sysinfo_300 = (End of data from sysinfo program) # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: flagsurl000 = ./pgi2017_flags.xml hw_avail = Dec-2016 prepared_by = vgv (is never output, only tags rawfile) hw_nthreadspercore = 8 hw_ncoresperchip = 10 hw_ncores = 20 hw_nchips = 2 hw_cpu_name = POWER8NVL (raw), altivec supported hw_cpu_mhz = 2061 hw_disk = 14P add more disk info here sw_file = lustre sw_state = Run level 5 (add definition here) sw_peak_ptrsize = Not Applicable hw_memory000 = 260546 MB sw_os000 = Red Hat Enterprise Linux Server release 7.3 sw_os001 = (Maipo) sw_os002 = 3.10.0-514.el7.ppc64le notes_plat_sysinfo_000 = Sysinfo program notes_plat_sysinfo_005 = /lustre/atlas2/stf006/scratch/vgv/spec/accel/kit75summitdev/Docs/sysinfo notes_plat_sysinfo_010 = $Rev: 6965 $ $Date:: 2015-04-21 #$ c05a7f14b1b1765e3fe1df68447e8a35 notes_plat_sysinfo_015 = running on summitdev-r0c2n09 Tue May 9 19:25:53 2017 notes_plat_sysinfo_020 = notes_plat_sysinfo_025 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_030 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_035 = http://www.spec.org/accel/Docs/config.html#sysinfo notes_plat_sysinfo_040 = notes_plat_sysinfo_045 = From /proc/cpuinfo notes_plat_sysinfo_050 = clock : 2394.000000MHz notes_plat_sysinfo_055 = clock : 2427.000000MHz notes_plat_sysinfo_060 = clock : 2460.000000MHz notes_plat_sysinfo_065 = clock : 2626.000000MHz notes_plat_sysinfo_070 = clock : 2726.000000MHz notes_plat_sysinfo_075 = clock : 2926.000000MHz notes_plat_sysinfo_080 = machine : PowerNV 8335-GTB notes_plat_sysinfo_085 = model : 8335-GTB notes_plat_sysinfo_090 = platform : PowerNV notes_plat_sysinfo_095 = revision : 1.0 (pvr 004c 0100) notes_plat_sysinfo_100 = cpu : POWER8NVL (raw), altivec supported notes_plat_sysinfo_105 = * notes_plat_sysinfo_110 = * 0 "physical id" tags found. Perhaps this is an older system, notes_plat_sysinfo_115 = * or a virtualized system. Not attempting to guess how to notes_plat_sysinfo_120 = * count chips/cores for this system. notes_plat_sysinfo_125 = * notes_plat_sysinfo_130 = 160 "processors" notes_plat_sysinfo_135 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_140 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_145 = caution.) notes_plat_sysinfo_150 = notes_plat_sysinfo_155 = From /proc/meminfo notes_plat_sysinfo_160 = MemTotal: 266799296 kB notes_plat_sysinfo_165 = HugePages_Total: 0 notes_plat_sysinfo_170 = Hugepagesize: 16384 kB notes_plat_sysinfo_175 = notes_plat_sysinfo_180 = From /etc/*release* /etc/*version* notes_plat_sysinfo_185 = os-release: notes_plat_sysinfo_190 = NAME="Red Hat Enterprise Linux Server" notes_plat_sysinfo_195 = VERSION="7.3 (Maipo)" notes_plat_sysinfo_200 = ID="rhel" notes_plat_sysinfo_205 = ID_LIKE="fedora" notes_plat_sysinfo_210 = VERSION_ID="7.3" notes_plat_sysinfo_215 = PRETTY_NAME="Red Hat Enterprise Linux Server 7.3 (Maipo)" notes_plat_sysinfo_220 = ANSI_COLOR="0;31" notes_plat_sysinfo_225 = CPE_NAME="cpe:/o:redhat:enterprise_linux:7.3:GA:server" notes_plat_sysinfo_230 = redhat-release: Red Hat Enterprise Linux Server release 7.3 (Maipo) notes_plat_sysinfo_235 = system-release: Red Hat Enterprise Linux Server release 7.3 (Maipo) notes_plat_sysinfo_240 = system-release-cpe: cpe:/o:redhat:enterprise_linux:7.3:ga:server notes_plat_sysinfo_245 = notes_plat_sysinfo_250 = uname -a: notes_plat_sysinfo_255 = Linux summitdev-r0c2n09 3.10.0-514.el7.ppc64le #1 SMP Wed Oct 19 11:27:06 EDT notes_plat_sysinfo_260 = 2016 ppc64le ppc64le ppc64le GNU/Linux notes_plat_sysinfo_265 = notes_plat_sysinfo_270 = run-level 5 Apr 26 16:49 notes_plat_sysinfo_275 = notes_plat_sysinfo_280 = SPEC is set to: /lustre/atlas2/stf006/scratch/vgv/spec/accel/kit75summitdev notes_plat_sysinfo_285 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_290 = 10.36.226.77@o2ib:/atlas2 lustre 14P 7.3P 5.9P 56% /lustre/atlas2 notes_plat_sysinfo_295 = notes_plat_sysinfo_300 = (End of data from sysinfo program) # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: flagsurl000 = ./pgi2017_flags.xml hw_avail = Dec-2016 prepared_by = vgv (is never output, only tags rawfile) hw_nthreadspercore = 8 hw_ncoresperchip = 10 hw_ncores = 20 hw_nchips = 2 hw_cpu_name = POWER8NVL (raw), altivec supported hw_cpu_mhz = 2061 hw_disk = 14P add more disk info here sw_file = lustre sw_state = Run level 5 (add definition here) sw_peak_ptrsize = Not Applicable hw_memory000 = 260546 MB sw_os000 = Red Hat Enterprise Linux Server release 7.3 sw_os001 = (Maipo) sw_os002 = 3.10.0-514.el7.ppc64le notes_plat_sysinfo_000 = Sysinfo program notes_plat_sysinfo_005 = /lustre/atlas2/stf006/scratch/vgv/spec/accel/kit75summitdev/Docs/sysinfo notes_plat_sysinfo_010 = $Rev: 6965 $ $Date:: 2015-04-21 #$ c05a7f14b1b1765e3fe1df68447e8a35 notes_plat_sysinfo_015 = running on summitdev-r0c2n09 Tue May 9 19:25:53 2017 notes_plat_sysinfo_020 = notes_plat_sysinfo_025 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_030 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_035 = http://www.spec.org/accel/Docs/config.html#sysinfo notes_plat_sysinfo_040 = notes_plat_sysinfo_045 = From /proc/cpuinfo notes_plat_sysinfo_050 = clock : 2394.000000MHz notes_plat_sysinfo_055 = clock : 2427.000000MHz notes_plat_sysinfo_060 = clock : 2460.000000MHz notes_plat_sysinfo_065 = clock : 2626.000000MHz notes_plat_sysinfo_070 = clock : 2726.000000MHz notes_plat_sysinfo_075 = clock : 2926.000000MHz notes_plat_sysinfo_080 = machine : PowerNV 8335-GTB notes_plat_sysinfo_085 = model : 8335-GTB notes_plat_sysinfo_090 = platform : PowerNV notes_plat_sysinfo_095 = revision : 1.0 (pvr 004c 0100) notes_plat_sysinfo_100 = cpu : POWER8NVL (raw), altivec supported notes_plat_sysinfo_105 = * notes_plat_sysinfo_110 = * 0 "physical id" tags found. Perhaps this is an older system, notes_plat_sysinfo_115 = * or a virtualized system. Not attempting to guess how to notes_plat_sysinfo_120 = * count chips/cores for this system. notes_plat_sysinfo_125 = * notes_plat_sysinfo_130 = 160 "processors" notes_plat_sysinfo_135 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_140 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_145 = caution.) notes_plat_sysinfo_150 = notes_plat_sysinfo_155 = From /proc/meminfo notes_plat_sysinfo_160 = MemTotal: 266799296 kB notes_plat_sysinfo_165 = HugePages_Total: 0 notes_plat_sysinfo_170 = Hugepagesize: 16384 kB notes_plat_sysinfo_175 = notes_plat_sysinfo_180 = From /etc/*release* /etc/*version* notes_plat_sysinfo_185 = os-release: notes_plat_sysinfo_190 = NAME="Red Hat Enterprise Linux Server" notes_plat_sysinfo_195 = VERSION="7.3 (Maipo)" notes_plat_sysinfo_200 = ID="rhel" notes_plat_sysinfo_205 = ID_LIKE="fedora" notes_plat_sysinfo_210 = VERSION_ID="7.3" notes_plat_sysinfo_215 = PRETTY_NAME="Red Hat Enterprise Linux Server 7.3 (Maipo)" notes_plat_sysinfo_220 = ANSI_COLOR="0;31" notes_plat_sysinfo_225 = CPE_NAME="cpe:/o:redhat:enterprise_linux:7.3:GA:server" notes_plat_sysinfo_230 = redhat-release: Red Hat Enterprise Linux Server release 7.3 (Maipo) notes_plat_sysinfo_235 = system-release: Red Hat Enterprise Linux Server release 7.3 (Maipo) notes_plat_sysinfo_240 = system-release-cpe: cpe:/o:redhat:enterprise_linux:7.3:ga:server notes_plat_sysinfo_245 = notes_plat_sysinfo_250 = uname -a: notes_plat_sysinfo_255 = Linux summitdev-r0c2n09 3.10.0-514.el7.ppc64le #1 SMP Wed Oct 19 11:27:06 EDT notes_plat_sysinfo_260 = 2016 ppc64le ppc64le ppc64le GNU/Linux notes_plat_sysinfo_265 = notes_plat_sysinfo_270 = run-level 5 Apr 26 16:49 notes_plat_sysinfo_275 = notes_plat_sysinfo_280 = SPEC is set to: /lustre/atlas2/stf006/scratch/vgv/spec/accel/kit75summitdev notes_plat_sysinfo_285 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_290 = 10.36.226.77@o2ib:/atlas2 lustre 14P 7.3P 5.9P 56% /lustre/atlas2 notes_plat_sysinfo_295 = notes_plat_sysinfo_300 = (End of data from sysinfo program) # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: flagsurl000 = ./pgi2017_flags.xml hw_avail = Dec-2016 sw_avail = Apr-2017 prepared_by = vgv (is never output, only tags rawfile) hw_model = IBM POWER8 hw_nthreadspercore = 8 hw_ncoresperchip = 10 hw_ncores = 20 hw_nchips = 2 hw_cpu_name = POWER8NVL (raw), altivec supported hw_cpu_mhz = 2061 hw_ncpuorder = 1,2 chips hw_disk = 14P add more disk info here sw_compiler = PGI Compilers and Tools 17.4-0 linuxpower sw_file = lustre sw_state = Run level 5 (add definition here) sw_peak_ptrsize = Not Applicable hw_memory000 = 260546 MB sw_os000 = Red Hat Enterprise Linux Server release 7.3 sw_os001 = (Maipo) sw_os002 = 3.10.0-514.el7.ppc64le notes_plat_sysinfo_000 = Sysinfo program notes_plat_sysinfo_005 = /lustre/atlas2/stf006/scratch/vgv/spec/accel/kit75summitdev/Docs/sysinfo notes_plat_sysinfo_010 = $Rev: 6965 $ $Date:: 2015-04-21 #$ c05a7f14b1b1765e3fe1df68447e8a35 notes_plat_sysinfo_015 = running on summitdev-r0c2n09 Tue May 9 19:25:53 2017 notes_plat_sysinfo_020 = notes_plat_sysinfo_025 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_030 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_035 = http://www.spec.org/accel/Docs/config.html#sysinfo notes_plat_sysinfo_040 = notes_plat_sysinfo_045 = From /proc/cpuinfo notes_plat_sysinfo_050 = clock : 2394.000000MHz notes_plat_sysinfo_055 = clock : 2427.000000MHz notes_plat_sysinfo_060 = clock : 2460.000000MHz notes_plat_sysinfo_065 = clock : 2626.000000MHz notes_plat_sysinfo_070 = clock : 2726.000000MHz notes_plat_sysinfo_075 = clock : 2926.000000MHz notes_plat_sysinfo_080 = machine : PowerNV 8335-GTB notes_plat_sysinfo_085 = model : 8335-GTB notes_plat_sysinfo_090 = platform : PowerNV notes_plat_sysinfo_095 = revision : 1.0 (pvr 004c 0100) notes_plat_sysinfo_100 = cpu : POWER8NVL (raw), altivec supported notes_plat_sysinfo_105 = * notes_plat_sysinfo_110 = * 0 "physical id" tags found. Perhaps this is an older system, notes_plat_sysinfo_115 = * or a virtualized system. Not attempting to guess how to notes_plat_sysinfo_120 = * count chips/cores for this system. notes_plat_sysinfo_125 = * notes_plat_sysinfo_130 = 160 "processors" notes_plat_sysinfo_135 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_140 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_145 = caution.) notes_plat_sysinfo_150 = notes_plat_sysinfo_155 = From /proc/meminfo notes_plat_sysinfo_160 = MemTotal: 266799296 kB notes_plat_sysinfo_165 = HugePages_Total: 0 notes_plat_sysinfo_170 = Hugepagesize: 16384 kB notes_plat_sysinfo_175 = notes_plat_sysinfo_180 = From /etc/*release* /etc/*version* notes_plat_sysinfo_185 = os-release: notes_plat_sysinfo_190 = NAME="Red Hat Enterprise Linux Server" notes_plat_sysinfo_195 = VERSION="7.3 (Maipo)" notes_plat_sysinfo_200 = ID="rhel" notes_plat_sysinfo_205 = ID_LIKE="fedora" notes_plat_sysinfo_210 = VERSION_ID="7.3" notes_plat_sysinfo_215 = PRETTY_NAME="Red Hat Enterprise Linux Server 7.3 (Maipo)" notes_plat_sysinfo_220 = ANSI_COLOR="0;31" notes_plat_sysinfo_225 = CPE_NAME="cpe:/o:redhat:enterprise_linux:7.3:GA:server" notes_plat_sysinfo_230 = redhat-release: Red Hat Enterprise Linux Server release 7.3 (Maipo) notes_plat_sysinfo_235 = system-release: Red Hat Enterprise Linux Server release 7.3 (Maipo) notes_plat_sysinfo_240 = system-release-cpe: cpe:/o:redhat:enterprise_linux:7.3:ga:server notes_plat_sysinfo_245 = notes_plat_sysinfo_250 = uname -a: notes_plat_sysinfo_255 = Linux summitdev-r0c2n09 3.10.0-514.el7.ppc64le #1 SMP Wed Oct 19 11:27:06 EDT notes_plat_sysinfo_260 = 2016 ppc64le ppc64le ppc64le GNU/Linux notes_plat_sysinfo_265 = notes_plat_sysinfo_270 = run-level 5 Apr 26 16:49 notes_plat_sysinfo_275 = notes_plat_sysinfo_280 = SPEC is set to: /lustre/atlas2/stf006/scratch/vgv/spec/accel/kit75summitdev notes_plat_sysinfo_285 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_290 = 10.36.226.77@o2ib:/atlas2 lustre 14P 7.3P 5.9P 56% /lustre/atlas2 notes_plat_sysinfo_295 = notes_plat_sysinfo_300 = (End of data from sysinfo program) # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: flagsurl000 = ./pgi2017_flags.xml hw_avail = Dec-2016 sw_avail = Apr-2017 prepared_by = vgv (is never output, only tags rawfile) hw_model = IBM POWER8 hw_nthreadspercore = 8 hw_ncoresperchip = 10 hw_ncores = 20 hw_nchips = 2 hw_cpu_name = POWER8NVL (raw), altivec supported hw_cpu_mhz = 2061 hw_ncpuorder = 1,2 chips hw_disk = 14P add more disk info here sw_compiler = PGI Compilers and Tools 17.4-0 linuxpower sw_file = lustre sw_state = Run level 5 (add definition here) sw_base_ptrsize = 64-bit sw_peak_ptrsize = Not Applicable hw_memory000 = 260546 MB sw_os000 = Red Hat Enterprise Linux Server release 7.3 sw_os001 = (Maipo) sw_os002 = 3.10.0-514.el7.ppc64le notes_plat_sysinfo_000 = Sysinfo program notes_plat_sysinfo_005 = /lustre/atlas2/stf006/scratch/vgv/spec/accel/kit75summitdev/Docs/sysinfo notes_plat_sysinfo_010 = $Rev: 6965 $ $Date:: 2015-04-21 #$ c05a7f14b1b1765e3fe1df68447e8a35 notes_plat_sysinfo_015 = running on summitdev-r0c2n09 Tue May 9 19:25:53 2017 notes_plat_sysinfo_020 = notes_plat_sysinfo_025 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_030 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_035 = http://www.spec.org/accel/Docs/config.html#sysinfo notes_plat_sysinfo_040 = notes_plat_sysinfo_045 = From /proc/cpuinfo notes_plat_sysinfo_050 = clock : 2394.000000MHz notes_plat_sysinfo_055 = clock : 2427.000000MHz notes_plat_sysinfo_060 = clock : 2460.000000MHz notes_plat_sysinfo_065 = clock : 2626.000000MHz notes_plat_sysinfo_070 = clock : 2726.000000MHz notes_plat_sysinfo_075 = clock : 2926.000000MHz notes_plat_sysinfo_080 = machine : PowerNV 8335-GTB notes_plat_sysinfo_085 = model : 8335-GTB notes_plat_sysinfo_090 = platform : PowerNV notes_plat_sysinfo_095 = revision : 1.0 (pvr 004c 0100) notes_plat_sysinfo_100 = cpu : POWER8NVL (raw), altivec supported notes_plat_sysinfo_105 = * notes_plat_sysinfo_110 = * 0 "physical id" tags found. Perhaps this is an older system, notes_plat_sysinfo_115 = * or a virtualized system. Not attempting to guess how to notes_plat_sysinfo_120 = * count chips/cores for this system. notes_plat_sysinfo_125 = * notes_plat_sysinfo_130 = 160 "processors" notes_plat_sysinfo_135 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_140 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_145 = caution.) notes_plat_sysinfo_150 = notes_plat_sysinfo_155 = From /proc/meminfo notes_plat_sysinfo_160 = MemTotal: 266799296 kB notes_plat_sysinfo_165 = HugePages_Total: 0 notes_plat_sysinfo_170 = Hugepagesize: 16384 kB notes_plat_sysinfo_175 = notes_plat_sysinfo_180 = From /etc/*release* /etc/*version* notes_plat_sysinfo_185 = os-release: notes_plat_sysinfo_190 = NAME="Red Hat Enterprise Linux Server" notes_plat_sysinfo_195 = VERSION="7.3 (Maipo)" notes_plat_sysinfo_200 = ID="rhel" notes_plat_sysinfo_205 = ID_LIKE="fedora" notes_plat_sysinfo_210 = VERSION_ID="7.3" notes_plat_sysinfo_215 = PRETTY_NAME="Red Hat Enterprise Linux Server 7.3 (Maipo)" notes_plat_sysinfo_220 = ANSI_COLOR="0;31" notes_plat_sysinfo_225 = CPE_NAME="cpe:/o:redhat:enterprise_linux:7.3:GA:server" notes_plat_sysinfo_230 = redhat-release: Red Hat Enterprise Linux Server release 7.3 (Maipo) notes_plat_sysinfo_235 = system-release: Red Hat Enterprise Linux Server release 7.3 (Maipo) notes_plat_sysinfo_240 = system-release-cpe: cpe:/o:redhat:enterprise_linux:7.3:ga:server notes_plat_sysinfo_245 = notes_plat_sysinfo_250 = uname -a: notes_plat_sysinfo_255 = Linux summitdev-r0c2n09 3.10.0-514.el7.ppc64le #1 SMP Wed Oct 19 11:27:06 EDT notes_plat_sysinfo_260 = 2016 ppc64le ppc64le ppc64le GNU/Linux notes_plat_sysinfo_265 = notes_plat_sysinfo_270 = run-level 5 Apr 26 16:49 notes_plat_sysinfo_275 = notes_plat_sysinfo_280 = SPEC is set to: /lustre/atlas2/stf006/scratch/vgv/spec/accel/kit75summitdev notes_plat_sysinfo_285 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_290 = 10.36.226.77@o2ib:/atlas2 lustre 14P 7.3P 5.9P 56% /lustre/atlas2 notes_plat_sysinfo_295 = notes_plat_sysinfo_300 = (End of data from sysinfo program) # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: flagsurl000 = ./pgi2017_flags.xml test_sponsor = IBM tester = IBM hw_avail = Dec-2016 sw_avail = Apr-2017 prepared_by = vgv (is never output, only tags rawfile) hw_vendor = IBM hw_model = IBM POWER8 hw_nthreadspercore = 8 hw_ncoresperchip = 10 hw_ncores = 20 hw_nchips = 2 hw_cpu_name = POWER8NVL (raw), altivec supported hw_cpu_mhz = 2061 hw_ncpuorder = 1,2 chips hw_disk = 14P add more disk info here sw_compiler = PGI Compilers and Tools 17.4-0 linuxpower sw_file = lustre sw_state = Run level 5 (add definition here) sw_base_ptrsize = 64-bit sw_peak_ptrsize = Not Applicable hw_memory000 = 260546 MB sw_os000 = Red Hat Enterprise Linux Server release 7.3 sw_os001 = (Maipo) sw_os002 = 3.10.0-514.el7.ppc64le notes_plat_sysinfo_000 = Sysinfo program notes_plat_sysinfo_005 = /lustre/atlas2/stf006/scratch/vgv/spec/accel/kit75summitdev/Docs/sysinfo notes_plat_sysinfo_010 = $Rev: 6965 $ $Date:: 2015-04-21 #$ c05a7f14b1b1765e3fe1df68447e8a35 notes_plat_sysinfo_015 = running on summitdev-r0c2n09 Tue May 9 19:25:53 2017 notes_plat_sysinfo_020 = notes_plat_sysinfo_025 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_030 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_035 = http://www.spec.org/accel/Docs/config.html#sysinfo notes_plat_sysinfo_040 = notes_plat_sysinfo_045 = From /proc/cpuinfo notes_plat_sysinfo_050 = clock : 2394.000000MHz notes_plat_sysinfo_055 = clock : 2427.000000MHz notes_plat_sysinfo_060 = clock : 2460.000000MHz notes_plat_sysinfo_065 = clock : 2626.000000MHz notes_plat_sysinfo_070 = clock : 2726.000000MHz notes_plat_sysinfo_075 = clock : 2926.000000MHz notes_plat_sysinfo_080 = machine : PowerNV 8335-GTB notes_plat_sysinfo_085 = model : 8335-GTB notes_plat_sysinfo_090 = platform : PowerNV notes_plat_sysinfo_095 = revision : 1.0 (pvr 004c 0100) notes_plat_sysinfo_100 = cpu : POWER8NVL (raw), altivec supported notes_plat_sysinfo_105 = * notes_plat_sysinfo_110 = * 0 "physical id" tags found. Perhaps this is an older system, notes_plat_sysinfo_115 = * or a virtualized system. Not attempting to guess how to notes_plat_sysinfo_120 = * count chips/cores for this system. notes_plat_sysinfo_125 = * notes_plat_sysinfo_130 = 160 "processors" notes_plat_sysinfo_135 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_140 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_145 = caution.) notes_plat_sysinfo_150 = notes_plat_sysinfo_155 = From /proc/meminfo notes_plat_sysinfo_160 = MemTotal: 266799296 kB notes_plat_sysinfo_165 = HugePages_Total: 0 notes_plat_sysinfo_170 = Hugepagesize: 16384 kB notes_plat_sysinfo_175 = notes_plat_sysinfo_180 = From /etc/*release* /etc/*version* notes_plat_sysinfo_185 = os-release: notes_plat_sysinfo_190 = NAME="Red Hat Enterprise Linux Server" notes_plat_sysinfo_195 = VERSION="7.3 (Maipo)" notes_plat_sysinfo_200 = ID="rhel" notes_plat_sysinfo_205 = ID_LIKE="fedora" notes_plat_sysinfo_210 = VERSION_ID="7.3" notes_plat_sysinfo_215 = PRETTY_NAME="Red Hat Enterprise Linux Server 7.3 (Maipo)" notes_plat_sysinfo_220 = ANSI_COLOR="0;31" notes_plat_sysinfo_225 = CPE_NAME="cpe:/o:redhat:enterprise_linux:7.3:GA:server" notes_plat_sysinfo_230 = redhat-release: Red Hat Enterprise Linux Server release 7.3 (Maipo) notes_plat_sysinfo_235 = system-release: Red Hat Enterprise Linux Server release 7.3 (Maipo) notes_plat_sysinfo_240 = system-release-cpe: cpe:/o:redhat:enterprise_linux:7.3:ga:server notes_plat_sysinfo_245 = notes_plat_sysinfo_250 = uname -a: notes_plat_sysinfo_255 = Linux summitdev-r0c2n09 3.10.0-514.el7.ppc64le #1 SMP Wed Oct 19 11:27:06 EDT notes_plat_sysinfo_260 = 2016 ppc64le ppc64le ppc64le GNU/Linux notes_plat_sysinfo_265 = notes_plat_sysinfo_270 = run-level 5 Apr 26 16:49 notes_plat_sysinfo_275 = notes_plat_sysinfo_280 = SPEC is set to: /lustre/atlas2/stf006/scratch/vgv/spec/accel/kit75summitdev notes_plat_sysinfo_285 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_290 = 10.36.226.77@o2ib:/atlas2 lustre 14P 7.3P 5.9P 56% /lustre/atlas2 notes_plat_sysinfo_295 = notes_plat_sysinfo_300 = (End of data from sysinfo program) # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: flagsurl000 = ./pgi2017_flags.xml test_sponsor = IBM tester = ORNL hw_avail = Dec-2016 sw_avail = Apr-2017 prepared_by = vgv (is never output, only tags rawfile) hw_vendor = IBM hw_model = IBM POWER8 hw_nthreadspercore = 8 hw_ncoresperchip = 10 hw_ncores = 20 hw_nchips = 2 hw_cpu_name = POWER8NVL (raw), altivec supported hw_cpu_mhz = 2061 hw_ncpuorder = 1,2 chips hw_disk = 14P add more disk info here sw_compiler = PGI Compilers and Tools 17.4-0 linuxpower sw_file = lustre sw_state = Run level 5 (add definition here) sw_base_ptrsize = 64-bit sw_peak_ptrsize = Not Applicable sw_other = NVIDIA CUDA Toolkit 8.0.54 with CUDA driver 375.51 hw_memory000 = 260546 MB sw_os000 = Red Hat Enterprise Linux Server release 7.3 sw_os001 = (Maipo) sw_os002 = 3.10.0-514.el7.ppc64le notes_plat_sysinfo_000 = Sysinfo program notes_plat_sysinfo_005 = /lustre/atlas2/stf006/scratch/vgv/spec/accel/kit75summitdev/Docs/sysinfo notes_plat_sysinfo_010 = $Rev: 6965 $ $Date:: 2015-04-21 #$ c05a7f14b1b1765e3fe1df68447e8a35 notes_plat_sysinfo_015 = running on summitdev-r0c2n09 Tue May 9 19:25:53 2017 notes_plat_sysinfo_020 = notes_plat_sysinfo_025 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_030 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_035 = http://www.spec.org/accel/Docs/config.html#sysinfo notes_plat_sysinfo_040 = notes_plat_sysinfo_045 = From /proc/cpuinfo notes_plat_sysinfo_050 = clock : 2394.000000MHz notes_plat_sysinfo_055 = clock : 2427.000000MHz notes_plat_sysinfo_060 = clock : 2460.000000MHz notes_plat_sysinfo_065 = clock : 2626.000000MHz notes_plat_sysinfo_070 = clock : 2726.000000MHz notes_plat_sysinfo_075 = clock : 2926.000000MHz notes_plat_sysinfo_080 = machine : PowerNV 8335-GTB notes_plat_sysinfo_085 = model : 8335-GTB notes_plat_sysinfo_090 = platform : PowerNV notes_plat_sysinfo_095 = revision : 1.0 (pvr 004c 0100) notes_plat_sysinfo_100 = cpu : POWER8NVL (raw), altivec supported notes_plat_sysinfo_105 = * notes_plat_sysinfo_110 = * 0 "physical id" tags found. Perhaps this is an older system, notes_plat_sysinfo_115 = * or a virtualized system. Not attempting to guess how to notes_plat_sysinfo_120 = * count chips/cores for this system. notes_plat_sysinfo_125 = * notes_plat_sysinfo_130 = 160 "processors" notes_plat_sysinfo_135 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_140 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_145 = caution.) notes_plat_sysinfo_150 = notes_plat_sysinfo_155 = From /proc/meminfo notes_plat_sysinfo_160 = MemTotal: 266799296 kB notes_plat_sysinfo_165 = HugePages_Total: 0 notes_plat_sysinfo_170 = Hugepagesize: 16384 kB notes_plat_sysinfo_175 = notes_plat_sysinfo_180 = From /etc/*release* /etc/*version* notes_plat_sysinfo_185 = os-release: notes_plat_sysinfo_190 = NAME="Red Hat Enterprise Linux Server" notes_plat_sysinfo_195 = VERSION="7.3 (Maipo)" notes_plat_sysinfo_200 = ID="rhel" notes_plat_sysinfo_205 = ID_LIKE="fedora" notes_plat_sysinfo_210 = VERSION_ID="7.3" notes_plat_sysinfo_215 = PRETTY_NAME="Red Hat Enterprise Linux Server 7.3 (Maipo)" notes_plat_sysinfo_220 = ANSI_COLOR="0;31" notes_plat_sysinfo_225 = CPE_NAME="cpe:/o:redhat:enterprise_linux:7.3:GA:server" notes_plat_sysinfo_230 = redhat-release: Red Hat Enterprise Linux Server release 7.3 (Maipo) notes_plat_sysinfo_235 = system-release: Red Hat Enterprise Linux Server release 7.3 (Maipo) notes_plat_sysinfo_240 = system-release-cpe: cpe:/o:redhat:enterprise_linux:7.3:ga:server notes_plat_sysinfo_245 = notes_plat_sysinfo_250 = uname -a: notes_plat_sysinfo_255 = Linux summitdev-r0c2n09 3.10.0-514.el7.ppc64le #1 SMP Wed Oct 19 11:27:06 EDT notes_plat_sysinfo_260 = 2016 ppc64le ppc64le ppc64le GNU/Linux notes_plat_sysinfo_265 = notes_plat_sysinfo_270 = run-level 5 Apr 26 16:49 notes_plat_sysinfo_275 = notes_plat_sysinfo_280 = SPEC is set to: /lustre/atlas2/stf006/scratch/vgv/spec/accel/kit75summitdev notes_plat_sysinfo_285 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_290 = 10.36.226.77@o2ib:/atlas2 lustre 14P 7.3P 5.9P 56% /lustre/atlas2 notes_plat_sysinfo_295 = notes_plat_sysinfo_300 = (End of data from sysinfo program) # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: flagsurl000 = ./pgi2017_flags.xml hw_cpu_name = POWER8NVL (raw), altivec supported hw_cpu_mhz = 2061 hw_ncpuorder = 1,2 chips hw_pcache = 32KB I + 64KB D hw_scache = 512KB on chip per core hw_tcache = 8192KB on chip per chip hw_disk = 14P add more disk info here hw_accel_model = Tesla P100 hw_accel_vendor = NVIDIA hw_accel_name = NVIDIA Tesla P100 hw_accel_type = GPU sw_compiler = PGI Compilers and Tools 17.4-0 linuxpower sw_file = lustre sw_state = Run level 5 (add definition here) sw_base_ptrsize = 64-bit sw_peak_ptrsize = Not Applicable sw_other = NVIDIA CUDA Toolkit 8.0.54 with CUDA driver 375.51 test_sponsor = IBM license_num = 3440A tester = ORNL hw_avail = Dec-2016 sw_avail = Apr-2017 prepared_by = vgv (is never output, only tags rawfile) hw_vendor = IBM hw_model = IBM POWER8 hw_nthreadspercore = 8 hw_ncoresperchip = 10 hw_ncores = 20 hw_nchips = 2 hw_memory000 = 260546 MB sw_os000 = Red Hat Enterprise Linux Server release 7.3 sw_os001 = (Maipo) sw_os002 = 3.10.0-514.el7.ppc64le notes_plat_sysinfo_000 = Sysinfo program notes_plat_sysinfo_005 = /lustre/atlas2/stf006/scratch/vgv/spec/accel/kit75summitdev/Docs/sysinfo notes_plat_sysinfo_010 = $Rev: 6965 $ $Date:: 2015-04-21 #$ c05a7f14b1b1765e3fe1df68447e8a35 notes_plat_sysinfo_015 = running on summitdev-r0c2n09 Tue May 9 19:25:53 2017 notes_plat_sysinfo_020 = notes_plat_sysinfo_025 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_030 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_035 = http://www.spec.org/accel/Docs/config.html#sysinfo notes_plat_sysinfo_040 = notes_plat_sysinfo_045 = From /proc/cpuinfo notes_plat_sysinfo_050 = clock : 2394.000000MHz notes_plat_sysinfo_055 = clock : 2427.000000MHz notes_plat_sysinfo_060 = clock : 2460.000000MHz notes_plat_sysinfo_065 = clock : 2626.000000MHz notes_plat_sysinfo_070 = clock : 2726.000000MHz notes_plat_sysinfo_075 = clock : 2926.000000MHz notes_plat_sysinfo_080 = machine : PowerNV 8335-GTB notes_plat_sysinfo_085 = model : 8335-GTB notes_plat_sysinfo_090 = platform : PowerNV notes_plat_sysinfo_095 = revision : 1.0 (pvr 004c 0100) notes_plat_sysinfo_100 = cpu : POWER8NVL (raw), altivec supported notes_plat_sysinfo_105 = * notes_plat_sysinfo_110 = * 0 "physical id" tags found. Perhaps this is an older system, notes_plat_sysinfo_115 = * or a virtualized system. Not attempting to guess how to notes_plat_sysinfo_120 = * count chips/cores for this system. notes_plat_sysinfo_125 = * notes_plat_sysinfo_130 = 160 "processors" notes_plat_sysinfo_135 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_140 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_145 = caution.) notes_plat_sysinfo_150 = notes_plat_sysinfo_155 = From /proc/meminfo notes_plat_sysinfo_160 = MemTotal: 266799296 kB notes_plat_sysinfo_165 = HugePages_Total: 0 notes_plat_sysinfo_170 = Hugepagesize: 16384 kB notes_plat_sysinfo_175 = notes_plat_sysinfo_180 = From /etc/*release* /etc/*version* notes_plat_sysinfo_185 = os-release: notes_plat_sysinfo_190 = NAME="Red Hat Enterprise Linux Server" notes_plat_sysinfo_195 = VERSION="7.3 (Maipo)" notes_plat_sysinfo_200 = ID="rhel" notes_plat_sysinfo_205 = ID_LIKE="fedora" notes_plat_sysinfo_210 = VERSION_ID="7.3" notes_plat_sysinfo_215 = PRETTY_NAME="Red Hat Enterprise Linux Server 7.3 (Maipo)" notes_plat_sysinfo_220 = ANSI_COLOR="0;31" notes_plat_sysinfo_225 = CPE_NAME="cpe:/o:redhat:enterprise_linux:7.3:GA:server" notes_plat_sysinfo_230 = redhat-release: Red Hat Enterprise Linux Server release 7.3 (Maipo) notes_plat_sysinfo_235 = system-release: Red Hat Enterprise Linux Server release 7.3 (Maipo) notes_plat_sysinfo_240 = system-release-cpe: cpe:/o:redhat:enterprise_linux:7.3:ga:server notes_plat_sysinfo_245 = notes_plat_sysinfo_250 = uname -a: notes_plat_sysinfo_255 = Linux summitdev-r0c2n09 3.10.0-514.el7.ppc64le #1 SMP Wed Oct 19 11:27:06 EDT notes_plat_sysinfo_260 = 2016 ppc64le ppc64le ppc64le GNU/Linux notes_plat_sysinfo_265 = notes_plat_sysinfo_270 = run-level 5 Apr 26 16:49 notes_plat_sysinfo_275 = notes_plat_sysinfo_280 = SPEC is set to: /lustre/atlas2/stf006/scratch/vgv/spec/accel/kit75summitdev notes_plat_sysinfo_285 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_290 = 10.36.226.77@o2ib:/atlas2 lustre 14P 7.3P 5.9P 56% /lustre/atlas2 notes_plat_sysinfo_295 = notes_plat_sysinfo_300 = (End of data from sysinfo program) # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: flagsurl000 = ./pgi2017_flags.xml hw_cpu_name = POWER8NVL (raw), altivec supported hw_cpu_mhz = 2061 hw_ncpuorder = 1,2 chips hw_pcache = 32 KB I + 64KB D hw_scache = 512 KB on chip per core hw_tcache = 8192 KB on chip per chip hw_disk = 14P add more disk info here hw_accel_model = Tesla P100 hw_accel_vendor = NVIDIA hw_accel_name = NVIDIA Tesla P100 hw_accel_type = GPU sw_compiler = PGI Compilers and Tools 17.4-0 linuxpower sw_file = lustre sw_state = Run level 5 (add definition here) sw_base_ptrsize = 64-bit sw_peak_ptrsize = Not Applicable sw_other = NVIDIA CUDA Toolkit 8.0.54 with CUDA driver 375.51 test_sponsor = IBM license_num = 3440A tester = ORNL hw_avail = Dec-2016 sw_avail = Apr-2017 prepared_by = vgv (is never output, only tags rawfile) hw_vendor = IBM hw_model = IBM POWER8 hw_nthreadspercore = 8 hw_ncoresperchip = 10 hw_ncores = 20 hw_nchips = 2 hw_memory000 = 260546 MB sw_os000 = Red Hat Enterprise Linux Server release 7.3 sw_os001 = (Maipo) sw_os002 = 3.10.0-514.el7.ppc64le notes_plat_sysinfo_000 = Sysinfo program notes_plat_sysinfo_005 = /lustre/atlas2/stf006/scratch/vgv/spec/accel/kit75summitdev/Docs/sysinfo notes_plat_sysinfo_010 = $Rev: 6965 $ $Date:: 2015-04-21 #$ c05a7f14b1b1765e3fe1df68447e8a35 notes_plat_sysinfo_015 = running on summitdev-r0c2n09 Tue May 9 19:25:53 2017 notes_plat_sysinfo_020 = notes_plat_sysinfo_025 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_030 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_035 = http://www.spec.org/accel/Docs/config.html#sysinfo notes_plat_sysinfo_040 = notes_plat_sysinfo_045 = From /proc/cpuinfo notes_plat_sysinfo_050 = clock : 2394.000000MHz notes_plat_sysinfo_055 = clock : 2427.000000MHz notes_plat_sysinfo_060 = clock : 2460.000000MHz notes_plat_sysinfo_065 = clock : 2626.000000MHz notes_plat_sysinfo_070 = clock : 2726.000000MHz notes_plat_sysinfo_075 = clock : 2926.000000MHz notes_plat_sysinfo_080 = machine : PowerNV 8335-GTB notes_plat_sysinfo_085 = model : 8335-GTB notes_plat_sysinfo_090 = platform : PowerNV notes_plat_sysinfo_095 = revision : 1.0 (pvr 004c 0100) notes_plat_sysinfo_100 = cpu : POWER8NVL (raw), altivec supported notes_plat_sysinfo_105 = * notes_plat_sysinfo_110 = * 0 "physical id" tags found. Perhaps this is an older system, notes_plat_sysinfo_115 = * or a virtualized system. Not attempting to guess how to notes_plat_sysinfo_120 = * count chips/cores for this system. notes_plat_sysinfo_125 = * notes_plat_sysinfo_130 = 160 "processors" notes_plat_sysinfo_135 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_140 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_145 = caution.) notes_plat_sysinfo_150 = notes_plat_sysinfo_155 = From /proc/meminfo notes_plat_sysinfo_160 = MemTotal: 266799296 kB notes_plat_sysinfo_165 = HugePages_Total: 0 notes_plat_sysinfo_170 = Hugepagesize: 16384 kB notes_plat_sysinfo_175 = notes_plat_sysinfo_180 = From /etc/*release* /etc/*version* notes_plat_sysinfo_185 = os-release: notes_plat_sysinfo_190 = NAME="Red Hat Enterprise Linux Server" notes_plat_sysinfo_195 = VERSION="7.3 (Maipo)" notes_plat_sysinfo_200 = ID="rhel" notes_plat_sysinfo_205 = ID_LIKE="fedora" notes_plat_sysinfo_210 = VERSION_ID="7.3" notes_plat_sysinfo_215 = PRETTY_NAME="Red Hat Enterprise Linux Server 7.3 (Maipo)" notes_plat_sysinfo_220 = ANSI_COLOR="0;31" notes_plat_sysinfo_225 = CPE_NAME="cpe:/o:redhat:enterprise_linux:7.3:GA:server" notes_plat_sysinfo_230 = redhat-release: Red Hat Enterprise Linux Server release 7.3 (Maipo) notes_plat_sysinfo_235 = system-release: Red Hat Enterprise Linux Server release 7.3 (Maipo) notes_plat_sysinfo_240 = system-release-cpe: cpe:/o:redhat:enterprise_linux:7.3:ga:server notes_plat_sysinfo_245 = notes_plat_sysinfo_250 = uname -a: notes_plat_sysinfo_255 = Linux summitdev-r0c2n09 3.10.0-514.el7.ppc64le #1 SMP Wed Oct 19 11:27:06 EDT notes_plat_sysinfo_260 = 2016 ppc64le ppc64le ppc64le GNU/Linux notes_plat_sysinfo_265 = notes_plat_sysinfo_270 = run-level 5 Apr 26 16:49 notes_plat_sysinfo_275 = notes_plat_sysinfo_280 = SPEC is set to: /lustre/atlas2/stf006/scratch/vgv/spec/accel/kit75summitdev notes_plat_sysinfo_285 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_290 = 10.36.226.77@o2ib:/atlas2 lustre 14P 7.3P 5.9P 56% /lustre/atlas2 notes_plat_sysinfo_295 = notes_plat_sysinfo_300 = (End of data from sysinfo program) # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: flagsurl000 = ./pgi2017_flags.xml hw_cpu_name = POWER8NVL (raw), altivec supported hw_cpu_mhz = 2061 hw_ncpuorder = 1,2 chips hw_pcache = 32 KB I + 64KB D on chip per core hw_scache = 512 KB I+D on chip per core hw_tcache = 8192 KB I+D on chip per chip hw_disk = 14P add more disk info here hw_accel_model = Tesla P100 hw_accel_vendor = NVIDIA hw_accel_name = NVIDIA Tesla P100 hw_accel_type = GPU sw_compiler = PGI Compilers and Tools 17.4-0 linuxpower sw_file = lustre sw_state = Run level 5 (add definition here) sw_base_ptrsize = 64-bit sw_peak_ptrsize = Not Applicable sw_other = NVIDIA CUDA Toolkit 8.0.54 with CUDA driver 375.51 test_sponsor = IBM license_num = 3440A tester = ORNL hw_avail = Dec-2016 sw_avail = Apr-2017 prepared_by = vgv (is never output, only tags rawfile) hw_vendor = IBM hw_model = IBM POWER8 hw_nthreadspercore = 8 hw_ncoresperchip = 10 hw_ncores = 20 hw_nchips = 2 hw_memory000 = 260546 MB sw_os000 = Red Hat Enterprise Linux Server release 7.3 sw_os001 = (Maipo) sw_os002 = 3.10.0-514.el7.ppc64le notes_plat_sysinfo_000 = Sysinfo program notes_plat_sysinfo_005 = /lustre/atlas2/stf006/scratch/vgv/spec/accel/kit75summitdev/Docs/sysinfo notes_plat_sysinfo_010 = $Rev: 6965 $ $Date:: 2015-04-21 #$ c05a7f14b1b1765e3fe1df68447e8a35 notes_plat_sysinfo_015 = running on summitdev-r0c2n09 Tue May 9 19:25:53 2017 notes_plat_sysinfo_020 = notes_plat_sysinfo_025 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_030 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_035 = http://www.spec.org/accel/Docs/config.html#sysinfo notes_plat_sysinfo_040 = notes_plat_sysinfo_045 = From /proc/cpuinfo notes_plat_sysinfo_050 = clock : 2394.000000MHz notes_plat_sysinfo_055 = clock : 2427.000000MHz notes_plat_sysinfo_060 = clock : 2460.000000MHz notes_plat_sysinfo_065 = clock : 2626.000000MHz notes_plat_sysinfo_070 = clock : 2726.000000MHz notes_plat_sysinfo_075 = clock : 2926.000000MHz notes_plat_sysinfo_080 = machine : PowerNV 8335-GTB notes_plat_sysinfo_085 = model : 8335-GTB notes_plat_sysinfo_090 = platform : PowerNV notes_plat_sysinfo_095 = revision : 1.0 (pvr 004c 0100) notes_plat_sysinfo_100 = cpu : POWER8NVL (raw), altivec supported notes_plat_sysinfo_105 = * notes_plat_sysinfo_110 = * 0 "physical id" tags found. Perhaps this is an older system, notes_plat_sysinfo_115 = * or a virtualized system. Not attempting to guess how to notes_plat_sysinfo_120 = * count chips/cores for this system. notes_plat_sysinfo_125 = * notes_plat_sysinfo_130 = 160 "processors" notes_plat_sysinfo_135 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_140 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_145 = caution.) notes_plat_sysinfo_150 = notes_plat_sysinfo_155 = From /proc/meminfo notes_plat_sysinfo_160 = MemTotal: 266799296 kB notes_plat_sysinfo_165 = HugePages_Total: 0 notes_plat_sysinfo_170 = Hugepagesize: 16384 kB notes_plat_sysinfo_175 = notes_plat_sysinfo_180 = From /etc/*release* /etc/*version* notes_plat_sysinfo_185 = os-release: notes_plat_sysinfo_190 = NAME="Red Hat Enterprise Linux Server" notes_plat_sysinfo_195 = VERSION="7.3 (Maipo)" notes_plat_sysinfo_200 = ID="rhel" notes_plat_sysinfo_205 = ID_LIKE="fedora" notes_plat_sysinfo_210 = VERSION_ID="7.3" notes_plat_sysinfo_215 = PRETTY_NAME="Red Hat Enterprise Linux Server 7.3 (Maipo)" notes_plat_sysinfo_220 = ANSI_COLOR="0;31" notes_plat_sysinfo_225 = CPE_NAME="cpe:/o:redhat:enterprise_linux:7.3:GA:server" notes_plat_sysinfo_230 = redhat-release: Red Hat Enterprise Linux Server release 7.3 (Maipo) notes_plat_sysinfo_235 = system-release: Red Hat Enterprise Linux Server release 7.3 (Maipo) notes_plat_sysinfo_240 = system-release-cpe: cpe:/o:redhat:enterprise_linux:7.3:ga:server notes_plat_sysinfo_245 = notes_plat_sysinfo_250 = uname -a: notes_plat_sysinfo_255 = Linux summitdev-r0c2n09 3.10.0-514.el7.ppc64le #1 SMP Wed Oct 19 11:27:06 EDT notes_plat_sysinfo_260 = 2016 ppc64le ppc64le ppc64le GNU/Linux notes_plat_sysinfo_265 = notes_plat_sysinfo_270 = run-level 5 Apr 26 16:49 notes_plat_sysinfo_275 = notes_plat_sysinfo_280 = SPEC is set to: /lustre/atlas2/stf006/scratch/vgv/spec/accel/kit75summitdev notes_plat_sysinfo_285 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_290 = 10.36.226.77@o2ib:/atlas2 lustre 14P 7.3P 5.9P 56% /lustre/atlas2 notes_plat_sysinfo_295 = notes_plat_sysinfo_300 = (End of data from sysinfo program) # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: flagsurl000 = ./pgi2017_flags.xml hw_cpu_name = POWER8NVL (raw), altivec supported hw_cpu_mhz = 2061 hw_ncpuorder = 1,2 chips hw_pcache = 32 KB I + 64KB D on chip per core hw_scache = 512 KB I+D on chip per core hw_tcache = 8 MB I+D on chip per chip hw_disk = 14P add more disk info here hw_accel_model = Tesla P100 hw_accel_vendor = NVIDIA hw_accel_name = NVIDIA Tesla P100 hw_accel_type = GPU sw_compiler = PGI Compilers and Tools 17.4-0 linuxpower sw_file = lustre sw_state = Run level 5 (add definition here) sw_base_ptrsize = 64-bit sw_peak_ptrsize = Not Applicable sw_other = NVIDIA CUDA Toolkit 8.0.54 with CUDA driver 375.51 test_sponsor = IBM license_num = 3440A tester = ORNL hw_avail = Dec-2016 sw_avail = Apr-2017 prepared_by = vgv (is never output, only tags rawfile) hw_vendor = IBM hw_model = IBM POWER8 hw_nthreadspercore = 8 hw_ncoresperchip = 10 hw_ncores = 20 hw_nchips = 2 hw_memory000 = 260546 MB sw_os000 = Red Hat Enterprise Linux Server release 7.3 sw_os001 = (Maipo) sw_os002 = 3.10.0-514.el7.ppc64le notes_plat_sysinfo_000 = Sysinfo program notes_plat_sysinfo_005 = /lustre/atlas2/stf006/scratch/vgv/spec/accel/kit75summitdev/Docs/sysinfo notes_plat_sysinfo_010 = $Rev: 6965 $ $Date:: 2015-04-21 #$ c05a7f14b1b1765e3fe1df68447e8a35 notes_plat_sysinfo_015 = running on summitdev-r0c2n09 Tue May 9 19:25:53 2017 notes_plat_sysinfo_020 = notes_plat_sysinfo_025 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_030 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_035 = http://www.spec.org/accel/Docs/config.html#sysinfo notes_plat_sysinfo_040 = notes_plat_sysinfo_045 = From /proc/cpuinfo notes_plat_sysinfo_050 = clock : 2394.000000MHz notes_plat_sysinfo_055 = clock : 2427.000000MHz notes_plat_sysinfo_060 = clock : 2460.000000MHz notes_plat_sysinfo_065 = clock : 2626.000000MHz notes_plat_sysinfo_070 = clock : 2726.000000MHz notes_plat_sysinfo_075 = clock : 2926.000000MHz notes_plat_sysinfo_080 = machine : PowerNV 8335-GTB notes_plat_sysinfo_085 = model : 8335-GTB notes_plat_sysinfo_090 = platform : PowerNV notes_plat_sysinfo_095 = revision : 1.0 (pvr 004c 0100) notes_plat_sysinfo_100 = cpu : POWER8NVL (raw), altivec supported notes_plat_sysinfo_105 = * notes_plat_sysinfo_110 = * 0 "physical id" tags found. Perhaps this is an older system, notes_plat_sysinfo_115 = * or a virtualized system. Not attempting to guess how to notes_plat_sysinfo_120 = * count chips/cores for this system. notes_plat_sysinfo_125 = * notes_plat_sysinfo_130 = 160 "processors" notes_plat_sysinfo_135 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_140 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_145 = caution.) notes_plat_sysinfo_150 = notes_plat_sysinfo_155 = From /proc/meminfo notes_plat_sysinfo_160 = MemTotal: 266799296 kB notes_plat_sysinfo_165 = HugePages_Total: 0 notes_plat_sysinfo_170 = Hugepagesize: 16384 kB notes_plat_sysinfo_175 = notes_plat_sysinfo_180 = From /etc/*release* /etc/*version* notes_plat_sysinfo_185 = os-release: notes_plat_sysinfo_190 = NAME="Red Hat Enterprise Linux Server" notes_plat_sysinfo_195 = VERSION="7.3 (Maipo)" notes_plat_sysinfo_200 = ID="rhel" notes_plat_sysinfo_205 = ID_LIKE="fedora" notes_plat_sysinfo_210 = VERSION_ID="7.3" notes_plat_sysinfo_215 = PRETTY_NAME="Red Hat Enterprise Linux Server 7.3 (Maipo)" notes_plat_sysinfo_220 = ANSI_COLOR="0;31" notes_plat_sysinfo_225 = CPE_NAME="cpe:/o:redhat:enterprise_linux:7.3:GA:server" notes_plat_sysinfo_230 = redhat-release: Red Hat Enterprise Linux Server release 7.3 (Maipo) notes_plat_sysinfo_235 = system-release: Red Hat Enterprise Linux Server release 7.3 (Maipo) notes_plat_sysinfo_240 = system-release-cpe: cpe:/o:redhat:enterprise_linux:7.3:ga:server notes_plat_sysinfo_245 = notes_plat_sysinfo_250 = uname -a: notes_plat_sysinfo_255 = Linux summitdev-r0c2n09 3.10.0-514.el7.ppc64le #1 SMP Wed Oct 19 11:27:06 EDT notes_plat_sysinfo_260 = 2016 ppc64le ppc64le ppc64le GNU/Linux notes_plat_sysinfo_265 = notes_plat_sysinfo_270 = run-level 5 Apr 26 16:49 notes_plat_sysinfo_275 = notes_plat_sysinfo_280 = SPEC is set to: /lustre/atlas2/stf006/scratch/vgv/spec/accel/kit75summitdev notes_plat_sysinfo_285 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_290 = 10.36.226.77@o2ib:/atlas2 lustre 14P 7.3P 5.9P 56% /lustre/atlas2 notes_plat_sysinfo_295 = notes_plat_sysinfo_300 = (End of data from sysinfo program) # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: flagsurl000 = ./pgi2017_flags.xml hw_cpu_name = POWER8NVL (raw), altivec supported hw_cpu_mhz = 2061 hw_ncpuorder = 1,2 chips hw_pcache = 32 KB I + 64KB D on chip per core hw_scache = 512 KB I+D on chip per core hw_tcache = 8 MB I+D on chip per chip hw_ocache = None hw_disk = 14P add more disk info here hw_accel_model = Tesla P100 hw_accel_vendor = NVIDIA hw_accel_name = NVIDIA Tesla P100 hw_accel_type = GPU sw_compiler = PGI Compilers and Tools 17.4-0 linuxpower sw_file = lustre sw_state = Run level 5 (add definition here) sw_base_ptrsize = 64-bit sw_peak_ptrsize = Not Applicable sw_other = NVIDIA CUDA Toolkit 8.0.54 with CUDA driver 375.51 test_sponsor = IBM license_num = 3440A tester = ORNL hw_avail = Dec-2016 sw_avail = Apr-2017 prepared_by = vgv (is never output, only tags rawfile) hw_vendor = IBM hw_model = IBM POWER8 hw_nthreadspercore = 8 hw_ncoresperchip = 10 hw_ncores = 20 hw_nchips = 2 hw_memory000 = 260546 MB sw_os000 = Red Hat Enterprise Linux Server release 7.3 sw_os001 = (Maipo) sw_os002 = 3.10.0-514.el7.ppc64le notes_plat_sysinfo_000 = Sysinfo program notes_plat_sysinfo_005 = /lustre/atlas2/stf006/scratch/vgv/spec/accel/kit75summitdev/Docs/sysinfo notes_plat_sysinfo_010 = $Rev: 6965 $ $Date:: 2015-04-21 #$ c05a7f14b1b1765e3fe1df68447e8a35 notes_plat_sysinfo_015 = running on summitdev-r0c2n09 Tue May 9 19:25:53 2017 notes_plat_sysinfo_020 = notes_plat_sysinfo_025 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_030 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_035 = http://www.spec.org/accel/Docs/config.html#sysinfo notes_plat_sysinfo_040 = notes_plat_sysinfo_045 = From /proc/cpuinfo notes_plat_sysinfo_050 = clock : 2394.000000MHz notes_plat_sysinfo_055 = clock : 2427.000000MHz notes_plat_sysinfo_060 = clock : 2460.000000MHz notes_plat_sysinfo_065 = clock : 2626.000000MHz notes_plat_sysinfo_070 = clock : 2726.000000MHz notes_plat_sysinfo_075 = clock : 2926.000000MHz notes_plat_sysinfo_080 = machine : PowerNV 8335-GTB notes_plat_sysinfo_085 = model : 8335-GTB notes_plat_sysinfo_090 = platform : PowerNV notes_plat_sysinfo_095 = revision : 1.0 (pvr 004c 0100) notes_plat_sysinfo_100 = cpu : POWER8NVL (raw), altivec supported notes_plat_sysinfo_105 = * notes_plat_sysinfo_110 = * 0 "physical id" tags found. Perhaps this is an older system, notes_plat_sysinfo_115 = * or a virtualized system. Not attempting to guess how to notes_plat_sysinfo_120 = * count chips/cores for this system. notes_plat_sysinfo_125 = * notes_plat_sysinfo_130 = 160 "processors" notes_plat_sysinfo_135 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_140 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_145 = caution.) notes_plat_sysinfo_150 = notes_plat_sysinfo_155 = From /proc/meminfo notes_plat_sysinfo_160 = MemTotal: 266799296 kB notes_plat_sysinfo_165 = HugePages_Total: 0 notes_plat_sysinfo_170 = Hugepagesize: 16384 kB notes_plat_sysinfo_175 = notes_plat_sysinfo_180 = From /etc/*release* /etc/*version* notes_plat_sysinfo_185 = os-release: notes_plat_sysinfo_190 = NAME="Red Hat Enterprise Linux Server" notes_plat_sysinfo_195 = VERSION="7.3 (Maipo)" notes_plat_sysinfo_200 = ID="rhel" notes_plat_sysinfo_205 = ID_LIKE="fedora" notes_plat_sysinfo_210 = VERSION_ID="7.3" notes_plat_sysinfo_215 = PRETTY_NAME="Red Hat Enterprise Linux Server 7.3 (Maipo)" notes_plat_sysinfo_220 = ANSI_COLOR="0;31" notes_plat_sysinfo_225 = CPE_NAME="cpe:/o:redhat:enterprise_linux:7.3:GA:server" notes_plat_sysinfo_230 = redhat-release: Red Hat Enterprise Linux Server release 7.3 (Maipo) notes_plat_sysinfo_235 = system-release: Red Hat Enterprise Linux Server release 7.3 (Maipo) notes_plat_sysinfo_240 = system-release-cpe: cpe:/o:redhat:enterprise_linux:7.3:ga:server notes_plat_sysinfo_245 = notes_plat_sysinfo_250 = uname -a: notes_plat_sysinfo_255 = Linux summitdev-r0c2n09 3.10.0-514.el7.ppc64le #1 SMP Wed Oct 19 11:27:06 EDT notes_plat_sysinfo_260 = 2016 ppc64le ppc64le ppc64le GNU/Linux notes_plat_sysinfo_265 = notes_plat_sysinfo_270 = run-level 5 Apr 26 16:49 notes_plat_sysinfo_275 = notes_plat_sysinfo_280 = SPEC is set to: /lustre/atlas2/stf006/scratch/vgv/spec/accel/kit75summitdev notes_plat_sysinfo_285 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_290 = 10.36.226.77@o2ib:/atlas2 lustre 14P 7.3P 5.9P 56% /lustre/atlas2 notes_plat_sysinfo_295 = notes_plat_sysinfo_300 = (End of data from sysinfo program) # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: flagsurl000 = ./pgi2017_flags.xml hw_cpu_name = POWER8NVL (raw), altivec supported hw_cpu_mhz = 2061 hw_ncpuorder = 1,2 chips hw_pcache = 32 KB I + 64 KB D on chip per core hw_scache = 512 KB I+D on chip per core hw_tcache = 8 MB I+D on chip per chip hw_ocache = None hw_disk = 14P add more disk info here hw_accel_model = Tesla P100 hw_accel_vendor = NVIDIA hw_accel_name = NVIDIA Tesla P100 hw_accel_type = GPU sw_compiler = PGI Compilers and Tools 17.4-0 linuxpower sw_file = lustre sw_state = Run level 5 (add definition here) sw_base_ptrsize = 64-bit sw_peak_ptrsize = Not Applicable sw_other = NVIDIA CUDA Toolkit 8.0.54 with CUDA driver 375.51 test_sponsor = IBM license_num = 3440A tester = ORNL hw_avail = Dec-2016 sw_avail = Apr-2017 prepared_by = vgv (is never output, only tags rawfile) hw_vendor = IBM hw_model = IBM POWER8 hw_nthreadspercore = 8 hw_ncoresperchip = 10 hw_ncores = 20 hw_nchips = 2 hw_memory000 = 260546 MB sw_os000 = Red Hat Enterprise Linux Server release 7.3 sw_os001 = (Maipo) sw_os002 = 3.10.0-514.el7.ppc64le notes_plat_sysinfo_000 = Sysinfo program notes_plat_sysinfo_005 = /lustre/atlas2/stf006/scratch/vgv/spec/accel/kit75summitdev/Docs/sysinfo notes_plat_sysinfo_010 = $Rev: 6965 $ $Date:: 2015-04-21 #$ c05a7f14b1b1765e3fe1df68447e8a35 notes_plat_sysinfo_015 = running on summitdev-r0c2n09 Tue May 9 19:25:53 2017 notes_plat_sysinfo_020 = notes_plat_sysinfo_025 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_030 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_035 = http://www.spec.org/accel/Docs/config.html#sysinfo notes_plat_sysinfo_040 = notes_plat_sysinfo_045 = From /proc/cpuinfo notes_plat_sysinfo_050 = clock : 2394.000000MHz notes_plat_sysinfo_055 = clock : 2427.000000MHz notes_plat_sysinfo_060 = clock : 2460.000000MHz notes_plat_sysinfo_065 = clock : 2626.000000MHz notes_plat_sysinfo_070 = clock : 2726.000000MHz notes_plat_sysinfo_075 = clock : 2926.000000MHz notes_plat_sysinfo_080 = machine : PowerNV 8335-GTB notes_plat_sysinfo_085 = model : 8335-GTB notes_plat_sysinfo_090 = platform : PowerNV notes_plat_sysinfo_095 = revision : 1.0 (pvr 004c 0100) notes_plat_sysinfo_100 = cpu : POWER8NVL (raw), altivec supported notes_plat_sysinfo_105 = * notes_plat_sysinfo_110 = * 0 "physical id" tags found. Perhaps this is an older system, notes_plat_sysinfo_115 = * or a virtualized system. Not attempting to guess how to notes_plat_sysinfo_120 = * count chips/cores for this system. notes_plat_sysinfo_125 = * notes_plat_sysinfo_130 = 160 "processors" notes_plat_sysinfo_135 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_140 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_145 = caution.) notes_plat_sysinfo_150 = notes_plat_sysinfo_155 = From /proc/meminfo notes_plat_sysinfo_160 = MemTotal: 266799296 kB notes_plat_sysinfo_165 = HugePages_Total: 0 notes_plat_sysinfo_170 = Hugepagesize: 16384 kB notes_plat_sysinfo_175 = notes_plat_sysinfo_180 = From /etc/*release* /etc/*version* notes_plat_sysinfo_185 = os-release: notes_plat_sysinfo_190 = NAME="Red Hat Enterprise Linux Server" notes_plat_sysinfo_195 = VERSION="7.3 (Maipo)" notes_plat_sysinfo_200 = ID="rhel" notes_plat_sysinfo_205 = ID_LIKE="fedora" notes_plat_sysinfo_210 = VERSION_ID="7.3" notes_plat_sysinfo_215 = PRETTY_NAME="Red Hat Enterprise Linux Server 7.3 (Maipo)" notes_plat_sysinfo_220 = ANSI_COLOR="0;31" notes_plat_sysinfo_225 = CPE_NAME="cpe:/o:redhat:enterprise_linux:7.3:GA:server" notes_plat_sysinfo_230 = redhat-release: Red Hat Enterprise Linux Server release 7.3 (Maipo) notes_plat_sysinfo_235 = system-release: Red Hat Enterprise Linux Server release 7.3 (Maipo) notes_plat_sysinfo_240 = system-release-cpe: cpe:/o:redhat:enterprise_linux:7.3:ga:server notes_plat_sysinfo_245 = notes_plat_sysinfo_250 = uname -a: notes_plat_sysinfo_255 = Linux summitdev-r0c2n09 3.10.0-514.el7.ppc64le #1 SMP Wed Oct 19 11:27:06 EDT notes_plat_sysinfo_260 = 2016 ppc64le ppc64le ppc64le GNU/Linux notes_plat_sysinfo_265 = notes_plat_sysinfo_270 = run-level 5 Apr 26 16:49 notes_plat_sysinfo_275 = notes_plat_sysinfo_280 = SPEC is set to: /lustre/atlas2/stf006/scratch/vgv/spec/accel/kit75summitdev notes_plat_sysinfo_285 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_290 = 10.36.226.77@o2ib:/atlas2 lustre 14P 7.3P 5.9P 56% /lustre/atlas2 notes_plat_sysinfo_295 = notes_plat_sysinfo_300 = (End of data from sysinfo program) # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: flagsurl000 = ./pgi2017_flags.xml hw_cpu_name = POWER8NVL (raw), altivec supported hw_cpu_mhz = 2061 hw_ncpuorder = 1,2 chips hw_pcache = 32 KB I + 64 KB D on chip per core hw_scache = 512 KB I+D on chip per core hw_tcache = 8 MB I+D on chip per chip hw_ocache = None hw_disk = 14P add more disk info here hw_accel_model = Tesla P100 hw_accel_vendor = NVIDIA hw_accel_name = NVIDIA Tesla P100 hw_accel_type = GPU sw_compiler = PGI Compilers and Tools 17.4-0 linuxpower sw_file = lustre sw_state = Run level 5 (add definition here) sw_base_ptrsize = 64-bit sw_peak_ptrsize = Not Applicable sw_other = NVIDIA CUDA Toolkit 8.0.54 with CUDA driver 375.51 test_sponsor = IBM license_num = 3440A tester = ORNL hw_avail = Dec-2016 sw_avail = Apr-2017 prepared_by = vgv (is never output, only tags rawfile) hw_vendor = IBM hw_model = IBM POWER8 hw_nthreadspercore = 8 hw_ncoresperchip = 10 hw_ncores = 20 hw_nchips = 2 hw_memory000 = 260546 MB sw_os000 = Red Hat Enterprise Linux Server release 7.3 sw_os001 = (Maipo) sw_os002 = 3.10.0-514.el7.ppc64le notes_plat_sysinfo_000 = Sysinfo program notes_plat_sysinfo_005 = /lustre/atlas2/stf006/scratch/vgv/spec/accel/kit75summitdev/Docs/sysinfo notes_plat_sysinfo_010 = $Rev: 6965 $ $Date:: 2015-04-21 #$ c05a7f14b1b1765e3fe1df68447e8a35 notes_plat_sysinfo_015 = running on summitdev-r0c2n09 Tue May 9 19:25:53 2017 notes_plat_sysinfo_020 = notes_plat_sysinfo_025 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_030 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_035 = http://www.spec.org/accel/Docs/config.html#sysinfo notes_plat_sysinfo_040 = notes_plat_sysinfo_045 = From /proc/cpuinfo notes_plat_sysinfo_050 = clock : 2394.000000MHz notes_plat_sysinfo_055 = clock : 2427.000000MHz notes_plat_sysinfo_060 = clock : 2460.000000MHz notes_plat_sysinfo_065 = clock : 2626.000000MHz notes_plat_sysinfo_070 = clock : 2726.000000MHz notes_plat_sysinfo_075 = clock : 2926.000000MHz notes_plat_sysinfo_080 = machine : PowerNV 8335-GTB notes_plat_sysinfo_085 = model : 8335-GTB notes_plat_sysinfo_090 = platform : PowerNV notes_plat_sysinfo_095 = revision : 1.0 (pvr 004c 0100) notes_plat_sysinfo_100 = cpu : POWER8NVL (raw), altivec supported notes_plat_sysinfo_105 = * notes_plat_sysinfo_110 = * 0 "physical id" tags found. Perhaps this is an older system, notes_plat_sysinfo_115 = * or a virtualized system. Not attempting to guess how to notes_plat_sysinfo_120 = * count chips/cores for this system. notes_plat_sysinfo_125 = * notes_plat_sysinfo_130 = 160 "processors" notes_plat_sysinfo_135 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_140 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_145 = caution.) notes_plat_sysinfo_150 = notes_plat_sysinfo_155 = From /proc/meminfo notes_plat_sysinfo_160 = MemTotal: 266799296 kB notes_plat_sysinfo_165 = HugePages_Total: 0 notes_plat_sysinfo_170 = Hugepagesize: 16384 kB notes_plat_sysinfo_175 = notes_plat_sysinfo_180 = From /etc/*release* /etc/*version* notes_plat_sysinfo_185 = os-release: notes_plat_sysinfo_190 = NAME="Red Hat Enterprise Linux Server" notes_plat_sysinfo_195 = VERSION="7.3 (Maipo)" notes_plat_sysinfo_200 = ID="rhel" notes_plat_sysinfo_205 = ID_LIKE="fedora" notes_plat_sysinfo_210 = VERSION_ID="7.3" notes_plat_sysinfo_215 = PRETTY_NAME="Red Hat Enterprise Linux Server 7.3 (Maipo)" notes_plat_sysinfo_220 = ANSI_COLOR="0;31" notes_plat_sysinfo_225 = CPE_NAME="cpe:/o:redhat:enterprise_linux:7.3:GA:server" notes_plat_sysinfo_230 = redhat-release: Red Hat Enterprise Linux Server release 7.3 (Maipo) notes_plat_sysinfo_235 = system-release: Red Hat Enterprise Linux Server release 7.3 (Maipo) notes_plat_sysinfo_240 = system-release-cpe: cpe:/o:redhat:enterprise_linux:7.3:ga:server notes_plat_sysinfo_245 = notes_plat_sysinfo_250 = uname -a: notes_plat_sysinfo_255 = Linux summitdev-r0c2n09 3.10.0-514.el7.ppc64le #1 SMP Wed Oct 19 11:27:06 EDT notes_plat_sysinfo_260 = 2016 ppc64le ppc64le ppc64le GNU/Linux notes_plat_sysinfo_265 = notes_plat_sysinfo_270 = run-level 5 Apr 26 16:49 notes_plat_sysinfo_275 = notes_plat_sysinfo_280 = SPEC is set to: /lustre/atlas2/stf006/scratch/vgv/spec/accel/kit75summitdev notes_plat_sysinfo_285 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_290 = 10.36.226.77@o2ib:/atlas2 lustre 14P 7.3P 5.9P 56% /lustre/atlas2 notes_plat_sysinfo_295 = notes_plat_sysinfo_300 = (End of data from sysinfo program) # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: flagsurl000 = ./pgi2017_flags.xml hw_cpu_name = POWER8NVL (raw), altivec supported hw_cpu_mhz = 2061 hw_ncpuorder = 1,2 chips hw_pcache = 32 KB I + 64 KB D on chip per core hw_scache = 512 KB I+D on chip per core hw_tcache = 8 MB I+D on chip per chip hw_ocache = None hw_disk = 14P add more disk info here hw_accel_model = Tesla P100 hw_accel_vendor = NVIDIA hw_accel_name = NVIDIA Tesla P100 hw_accel_type = GPU sw_compiler = PGI Compilers and Tools 17.4-0 linuxpower sw_file = lustre sw_state = Run level 5 (add definition here) sw_base_ptrsize = 64-bit sw_peak_ptrsize = Not Applicable sw_other = NVIDIA CUDA Toolkit 8.0.54 with CUDA driver 375.51 test_sponsor = IBM license_num = 3440A tester = ORNL hw_avail = Dec-2016 sw_avail = Apr-2017 prepared_by = vgv (is never output, only tags rawfile) hw_vendor = IBM hw_model = IBM POWER8 hw_nthreadspercore = 8 hw_ncoresperchip = 10 hw_ncores = 20 hw_nchips = 2 hw_memory000 = 260546 MB sw_os000 = Red Hat Enterprise Linux Server release 7.3 sw_os001 = (Maipo) sw_os002 = 3.10.0-514.el7.ppc64le notes_plat_sysinfo_000 = Sysinfo program notes_plat_sysinfo_005 = /lustre/atlas2/stf006/scratch/vgv/spec/accel/kit75summitdev/Docs/sysinfo notes_plat_sysinfo_010 = $Rev: 6965 $ $Date:: 2015-04-21 #$ c05a7f14b1b1765e3fe1df68447e8a35 notes_plat_sysinfo_015 = running on summitdev-r0c2n09 Tue May 9 19:25:53 2017 notes_plat_sysinfo_020 = notes_plat_sysinfo_025 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_030 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_035 = http://www.spec.org/accel/Docs/config.html#sysinfo notes_plat_sysinfo_040 = notes_plat_sysinfo_045 = From /proc/cpuinfo notes_plat_sysinfo_050 = clock : 2394.000000MHz notes_plat_sysinfo_055 = clock : 2427.000000MHz notes_plat_sysinfo_060 = clock : 2460.000000MHz notes_plat_sysinfo_065 = clock : 2626.000000MHz notes_plat_sysinfo_070 = clock : 2726.000000MHz notes_plat_sysinfo_075 = clock : 2926.000000MHz notes_plat_sysinfo_080 = machine : PowerNV 8335-GTB notes_plat_sysinfo_085 = model : 8335-GTB notes_plat_sysinfo_090 = platform : PowerNV notes_plat_sysinfo_095 = revision : 1.0 (pvr 004c 0100) notes_plat_sysinfo_100 = cpu : POWER8NVL (raw), altivec supported notes_plat_sysinfo_105 = * notes_plat_sysinfo_110 = * 0 "physical id" tags found. Perhaps this is an older system, notes_plat_sysinfo_115 = * or a virtualized system. Not attempting to guess how to notes_plat_sysinfo_120 = * count chips/cores for this system. notes_plat_sysinfo_125 = * notes_plat_sysinfo_130 = 160 "processors" notes_plat_sysinfo_135 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_140 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_145 = caution.) notes_plat_sysinfo_150 = notes_plat_sysinfo_155 = From /proc/meminfo notes_plat_sysinfo_160 = MemTotal: 266799296 kB notes_plat_sysinfo_165 = HugePages_Total: 0 notes_plat_sysinfo_170 = Hugepagesize: 16384 kB notes_plat_sysinfo_175 = notes_plat_sysinfo_180 = From /etc/*release* /etc/*version* notes_plat_sysinfo_185 = os-release: notes_plat_sysinfo_190 = NAME="Red Hat Enterprise Linux Server" notes_plat_sysinfo_195 = VERSION="7.3 (Maipo)" notes_plat_sysinfo_200 = ID="rhel" notes_plat_sysinfo_205 = ID_LIKE="fedora" notes_plat_sysinfo_210 = VERSION_ID="7.3" notes_plat_sysinfo_215 = PRETTY_NAME="Red Hat Enterprise Linux Server 7.3 (Maipo)" notes_plat_sysinfo_220 = ANSI_COLOR="0;31" notes_plat_sysinfo_225 = CPE_NAME="cpe:/o:redhat:enterprise_linux:7.3:GA:server" notes_plat_sysinfo_230 = redhat-release: Red Hat Enterprise Linux Server release 7.3 (Maipo) notes_plat_sysinfo_235 = system-release: Red Hat Enterprise Linux Server release 7.3 (Maipo) notes_plat_sysinfo_240 = system-release-cpe: cpe:/o:redhat:enterprise_linux:7.3:ga:server notes_plat_sysinfo_245 = notes_plat_sysinfo_250 = uname -a: notes_plat_sysinfo_255 = Linux summitdev-r0c2n09 3.10.0-514.el7.ppc64le #1 SMP Wed Oct 19 11:27:06 EDT notes_plat_sysinfo_260 = 2016 ppc64le ppc64le ppc64le GNU/Linux notes_plat_sysinfo_265 = notes_plat_sysinfo_270 = run-level 5 Apr 26 16:49 notes_plat_sysinfo_275 = notes_plat_sysinfo_280 = SPEC is set to: /lustre/atlas2/stf006/scratch/vgv/spec/accel/kit75summitdev notes_plat_sysinfo_285 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_290 = 10.36.226.77@o2ib:/atlas2 lustre 14P 7.3P 5.9P 56% /lustre/atlas2 notes_plat_sysinfo_295 = notes_plat_sysinfo_300 = (End of data from sysinfo program) # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: flagsurl000 = https://www.spec.org/accel/flags/pgi2017_flags.20170621.xml hw_cpu_name = POWER8NVL (raw), altivec supported hw_cpu_char = Simultaneous Multithreading (SMT) on hw_cpu_mhz = 3259 hw_cpu_max_mhz = 3857 hw_fpu = Integrated hw_ncpuorder = 1,2 chips hw_pcache = 32 KB I + 64 KB D on chip per core hw_scache = 512 KB I+D on chip per core hw_tcache = 8 MB I+D on chip per chip hw_ocache = 16 MB I+D off chip per 4 DIMMs hw_disk = 14P Lustre hw_accel_model = Tesla P100 hw_accel_vendor = NVIDIA hw_accel_name = NVIDIA Tesla P100 hw_accel_type = GPU hw_accel_connect = NVLink 1.0 hw_accel_ecc = yes hw_accel_desc = NVIDIA Tesla P100 "Pascal" GPU sw_accel_driver = NVIDIA CUDA driver 375.51 sw_compiler = PGI Premier Edition, Release 17.4 sw_file = lustre sw_state = Run level 5 (Multi-user, graphical) sw_base_ptrsize = 64-bit sw_peak_ptrsize = Not Applicable sw_other = NVIDIA CUDA Toolkit 8.0.54 test_sponsor = Oak Ridge National Laboratory license_num = 054A tester = Oak Ridge National Laboratory hw_avail = Dec-2016 sw_avail = Apr-2017 prepared_by = vgv (is never output, only tags rawfile) hw_vendor = IBM hw_model = IBM POWER8 S822LC hw_nthreadspercore = 8 hw_ncoresperchip = 10 hw_ncores = 20 hw_nchips = 2 hw_memory000 = 256 GB DDR4 1600 MHz sw_os000 = Red Hat Enterprise Linux Server release 7.3 sw_os001 = (Maipo) sw_os002 = 3.10.0-514.el7.ppc64le notes_plat_sysinfo_000 = Sysinfo program notes_plat_sysinfo_005 = /lustre/atlas2/stf006/scratch/vgv/spec/accel/kit75summitdev/Docs/sysinfo notes_plat_sysinfo_010 = $Rev: 6965 $ $Date:: 2015-04-21 #$ c05a7f14b1b1765e3fe1df68447e8a35 notes_plat_sysinfo_015 = running on summitdev-r0c2n09 Tue May 9 19:25:53 2017 notes_plat_sysinfo_020 = notes_plat_sysinfo_025 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_030 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_035 = http://www.spec.org/accel/Docs/config.html#sysinfo notes_plat_sysinfo_040 = notes_plat_sysinfo_045 = From /proc/cpuinfo notes_plat_sysinfo_050 = clock : 2394.000000MHz notes_plat_sysinfo_055 = clock : 2427.000000MHz notes_plat_sysinfo_060 = clock : 2460.000000MHz notes_plat_sysinfo_065 = clock : 2626.000000MHz notes_plat_sysinfo_070 = clock : 2726.000000MHz notes_plat_sysinfo_075 = clock : 2926.000000MHz notes_plat_sysinfo_080 = machine : PowerNV 8335-GTB notes_plat_sysinfo_085 = model : 8335-GTB notes_plat_sysinfo_090 = platform : PowerNV notes_plat_sysinfo_095 = revision : 1.0 (pvr 004c 0100) notes_plat_sysinfo_100 = cpu : POWER8NVL (raw), altivec supported notes_plat_sysinfo_105 = * notes_plat_sysinfo_110 = * 0 "physical id" tags found. Perhaps this is an older system, notes_plat_sysinfo_115 = * or a virtualized system. Not attempting to guess how to notes_plat_sysinfo_120 = * count chips/cores for this system. notes_plat_sysinfo_125 = * notes_plat_sysinfo_130 = 160 "processors" notes_plat_sysinfo_135 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_140 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_145 = caution.) notes_plat_sysinfo_150 = notes_plat_sysinfo_155 = From /proc/meminfo notes_plat_sysinfo_160 = MemTotal: 266799296 kB notes_plat_sysinfo_165 = HugePages_Total: 0 notes_plat_sysinfo_170 = Hugepagesize: 16384 kB notes_plat_sysinfo_175 = notes_plat_sysinfo_180 = From /etc/*release* /etc/*version* notes_plat_sysinfo_185 = os-release: notes_plat_sysinfo_190 = NAME="Red Hat Enterprise Linux Server" notes_plat_sysinfo_195 = VERSION="7.3 (Maipo)" notes_plat_sysinfo_200 = ID="rhel" notes_plat_sysinfo_205 = ID_LIKE="fedora" notes_plat_sysinfo_210 = VERSION_ID="7.3" notes_plat_sysinfo_215 = PRETTY_NAME="Red Hat Enterprise Linux Server 7.3 (Maipo)" notes_plat_sysinfo_220 = ANSI_COLOR="0;31" notes_plat_sysinfo_225 = CPE_NAME="cpe:/o:redhat:enterprise_linux:7.3:GA:server" notes_plat_sysinfo_230 = redhat-release: Red Hat Enterprise Linux Server release 7.3 (Maipo) notes_plat_sysinfo_235 = system-release: Red Hat Enterprise Linux Server release 7.3 (Maipo) notes_plat_sysinfo_240 = system-release-cpe: cpe:/o:redhat:enterprise_linux:7.3:ga:server notes_plat_sysinfo_245 = notes_plat_sysinfo_250 = uname -a: notes_plat_sysinfo_255 = Linux summitdev-r0c2n09 3.10.0-514.el7.ppc64le #1 SMP Wed Oct 19 11:27:06 EDT notes_plat_sysinfo_260 = 2016 ppc64le ppc64le ppc64le GNU/Linux notes_plat_sysinfo_265 = notes_plat_sysinfo_270 = run-level 5 Apr 26 16:49 notes_plat_sysinfo_275 = notes_plat_sysinfo_280 = SPEC is set to: /lustre/atlas2/stf006/scratch/vgv/spec/accel/kit75summitdev notes_plat_sysinfo_285 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_290 = 10.36.226.77@o2ib:/atlas2 lustre 14P 7.3P 5.9P 56% /lustre/atlas2 notes_plat_sysinfo_295 = notes_plat_sysinfo_300 = (End of data from sysinfo program)